Starter kit for off-grid LoRa Meshtastic mesh messaging, built around the RAK11310 core module with RP2040 microcontroller and a RAK19003 base board for the Client role, with OLED display and 2dBi antenna.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
Working current, with LoRa module transmittingCurrent: 130; Unit: µA
Product overview
Overview. The RAKwireless WisMesh RP2040 Starter Kit RAK11310 is a LoRa Meshtastic mesh network starter kit whose RAK11310 core module carries a Raspberry Pi RP2040 microcontroller and is pre-flashed with Meshtastic firmware. Messages are forwarded from node to node with no cellular or internet connection.
Main characteristics. This version combines the RAK19003 base board in a compact 30 x 35 mm format with two sensor slots, the RAK1921 OLED display supplied loose, and a 2dBi rubber antenna. It is set for the Client role and for 900MHz for US915/AU915/KR920/AS923.
Power and environment. The base board charges a 3.7 V battery at 4.5 – 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with MCU and sensors in sleep mode. It operates from -35 to +75 °C.
Typical uses. The kit suits off-grid Meshtastic messaging nodes and LoRa mesh links on isolated sites. It is compatible with Solar IP67 enclosures from the Unify collection.
Integration. The base board exposes the I2C, SPI, UART and USB lines of the WisConnector, allowing WisBlock sensor modules or the RAK12501 GNSS Location Module to be added.
Starter kit for off-grid LoRa Meshtastic mesh messaging, built around the RAK11310 core module with RP2040 microcontroller and a RAK19003 base board for the Client role, with OLED display and 2dBi antenna.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
900MHz for US915/AU915/KR920/AS923
Base Board and Additional Modules
RAK19003 Base Board-RAK1921 OLED display-2dBi rubber antenna
Battery voltage ( VBAT )
Maximum Value: –0.3 to 4.3; Unit: V
Capacity
As required
Charging current
350 mA
Charging voltage
4.5 – 5.5 V
Client Role
RAK1921 OLED Display
Combined Client-Tracker Role
RAK1921 OLED Display
Discharge current
At least 500 mA
ESD
Maximum Value: 2000; Unit: V
Extended Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
Current: 10; Unit: µA
IOs of WisConnector
Maximum Value: –0.3 to VDD+0.3; Unit: V
Leakage current, without any module on RAK19003
Current: 2; Unit: µA
Maximum output current
Current: 750; Unit: mA
Model
RAK19003
OLED Assembly Method
OLED Loose
Operational Temperature Range
Minimum: –35 ºC; Typical: +25 ºC; Maximum: +75 ºC
Power supply on the USB port ( VBUS )
Maximum Value: –0.3 to 5.5; Unit: V
Solar panel voltage ( CONN_S )
Maximum Value: –0.3 to 5.5; Unit: V
Standard voltage
3.7 V
Storage Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Tracker Role
RAK12501 GNSS Location Module
Working current, with LoRa module transmitting
Current: 130; Unit: µA
Applications and use cases
Architectures in which 119048 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 119048 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
119048
LoRa Meshtastic RP2040 starter kit with base board and OLED display
Charging current
350 mA
Discharge current
At least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details