RAK11310 – RP2040 LoRa Mesh Starter Kit with GNSS and Acceleration Sensor

RP2040 LoRa Mesh Starter Kit with GNSS and Acceleration Sensor

Microcontroller Development Boards

  • 350 mA
  • At least 500 mA
  • Current: 10; Unit: µA
  • Current: 2; Unit: µA
Manufacturer part number
119049
Manufacturer
RAKwireless
Charging current
350 mA
Discharge current
At least 500 mA

RAKwireless starter kit for off-grid LoRa Meshtastic mesh networks, with RAK11310 core module, RAK19003 base board, RAK12501 GNSS module and RAK1904 acceleration sensor, in the 900 MHz band.

Product overview

RAKwireless WisMesh RP2040 RAK11310 kit. The RAKwireless WisMesh RP2040 starter kit combines the RAK11310 core module, based on the Raspberry Pi RP2040 microcontroller and pre-flashed with Meshtastic firmware, with the RAK19003 base board. It enables LoRa mesh networks that work without cellular or internet connection, with messages relayed from node to node. The kit is set for the 900 MHz band (US915/AU915/KR920/AS923).

Main characteristics. The RAK19003 mini base board, 30 x 35 mm, provides two sensor slots. The kit includes the RAK12501 GNSS location module, the RAK1904 acceleration sensor and a 2 dBi rubber antenna, matching the Meshtastic Tracker role. A RAK1921 OLED display is provided for the Client and combined Client-Tracker roles.

Interfaces and connectivity. The RAK11310 core exposes I2C, SPI, UART and USB interfaces, along with analog inputs and general-purpose I/O pins. The USB connector provides power and programming access.

Power and environment. The base board charges a 3.7 V battery at 4.5 to 5.5 V and 350 mA and accepts a solar panel. Idle current is 10 µA with the WisBlock core and modules in sleep mode. The operating temperature range is -35 °C to +75 °C, and the extended range is -40 °C to +80 °C.

Typical uses. This kit suits off-grid messaging and position tracking networks, as well as prototyping of connected sensor nodes. It is compatible with the Solar IP67 enclosures from the Unify collection.

Integration. The kit is built on the Raspberry Pi Pico ecosystem and the Meshtastic protocol, with I/O signals exposed on the base board connectors for adding WisBlock modules.

See all specifications

Highlights

  • Frequency band: 900MHz for US915/AU915/KR920/AS923
  • Capacity: As required
  • Charging current: 350 mA
  • Charging voltage: 4.5 – 5.5 V
  • Client Role: RAK1921 OLED Display
  • Combined Client-Tracker Role: RAK1921 OLED Display

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote