RAKwireless WisMesh RP2040 starter kit for off-grid LoRa Meshtastic mesh networks, combining a RAK11310 core, a RAK19003 base board, an OLED display and a GNSS module for the Client and Tracker roles.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Maximum output currentCurrent: 750; Unit: mA
Working current, with LoRa module transmittingCurrent: 130; Unit: µA
Product overview
Overview. The RAKwireless WisMesh RP2040 Starter Kit (RAK19003) is a development platform for LoRa Meshtastic mesh networks. It combines the RAK11310 WisBlock Core module, powered by the Raspberry Pi RP2040 and pre-flashed with Meshtastic firmware, with a compact RAK19003 base board measuring 30 x 35 mm.
Roles and components. The kit supports the Meshtastic Client, Tracker and Router Repeater roles. This version includes the soldered RAK1921 OLED display, the RAK12501 GNSS location module and the RAK1904 acceleration sensor, plus a 2dBi rubber antenna. It matches the Meshtastic combined Client-Tracker role.
Connectivity. Messages are forwarded from node to node over LoRa technology, with no cellular or internet connection needed. The frequency band is 900MHz for US915/AU915/KR920/AS923. The base board exposes I2C, SPI, UART and USB interfaces, together with GPIO pins and a WisConnector.
Power and environment. The base board charges a 3.7 V battery at 4.5 to 5.5 V and 350 mA, accepts a solar panel and draws 10 µA idle with the MCU and sensors in sleep mode. The operational range is -35 to +75 °C, and the extended range is -40 to +80 °C.
Typical uses. The kit suits off-grid messaging, position tracking and asset monitoring in areas without cellular coverage. It is compatible with Solar IP67 enclosures from the Unify collection.
RAKwireless WisMesh RP2040 starter kit for off-grid LoRa Meshtastic mesh networks, combining a RAK11310 core, a RAK19003 base board, an OLED display and a GNSS module for the Client and Tracker roles.
Charging current350 mA
Discharge currentAt least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep modeCurrent: 10; Unit: µA
Leakage current, without any module on RAK19003Current: 2; Unit: µA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
Current: 10; Unit: µA
IOs of WisConnector
Maximum Value: –0.3 to VDD+0.3; Unit: V
Leakage current, without any module on RAK19003
Current: 2; Unit: µA
Maximum output current
Current: 750; Unit: mA
Model
RAK19003
OLED Assembly Method
OLED Soldered
Operational Temperature Range
Minimum: –35 ºC; Typical: +25 ºC; Maximum: +75 ºC
Power supply on the USB port ( VBUS )
Maximum Value: –0.3 to 5.5; Unit: V
Solar panel voltage ( CONN_S )
Maximum Value: –0.3 to 5.5; Unit: V
Standard voltage
3.7 V
Storage Temperature Range
Minimum: –40 ºC; Typical: +25 ºC; Maximum: +80 ºC
Tracker Role
RAK12501 GNSS Location Module
Working current, with LoRa module transmitting
Current: 130; Unit: µA
Applications and use cases
Architectures in which 119050 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 119050 and the other parts of your project.
Answers to the questions that the recorded characteristics of 119050 can answer. A question is not asked when nothing is recorded to answer it.
1Does it include GNSS/GPS?
Yes — recorded under "Base Board and Additional Modules": RAK19003 Base Board-RAK1921 OLED display-RAK12501 GNSS module-RAK1904 ACC sensor-2dBi rubber antenna.
2Does it have a USB interface?
Yes — recorded under "Power supply on the USB port ( VBUS )": Maximum Value: –0.3 to 5.5; Unit: V.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
119050
LoRa mesh starter kit with GNSS module and OLED display
Charging current
350 mA
Discharge current
At least 500 mA
Idle current, with WisBlock Core and WisBlock Modules in sleep mode
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details