Product overview
Overview. The RAKwireless RAK9105U is a LoRaWAN remote reboot switch, a power controller that lets you remotely power-cycle and control connected equipment through LoRaWAN downlink commands. It suits gateways, LTE routers, IP cameras and WiFi access points installed where direct access is difficult or costly.
Main characteristics. It is based on the RAK3172 module (STM32-based), providing secure, low-power LoRaWAN communication compatible with the LoRaWAN 1.0.3 specification and operating in Class C. It is configurable through WisToolBox and uses the RUI3 framework. Supported frequency bands are EU868, IN865, RU864, AU915, US915, KR920 and AS923-1/2/3/4. The LoRa antenna is built in, with an optional IPEX connector for an external antenna, peak gain 2 dBi and vertical polarization. The enclosure is PMMA.
Interfaces and connectivity. The product has a 4-pin terminal block for 12 VDC power input and optional RS485 communication (terminals A and B), plus a DC power jack. It is compatible with the RAK Battery Plus (RAK9155) for reading and reporting battery data.
Power and environment. The input accepts 12 VDC. Three outputs are available: an always-on 12 V/2 A output, an MCU-controlled 12 V/2 A output, and an MCU-controlled 5 V/3 A USB Type-C output, the 12 V output voltage following the input voltage minus 0.6 V. Efficiency is above 70%. Operating temperature ranges from -30 °C to +75 °C, storage temperature from -40 °C to +85 °C, and operating humidity from 0 to 95% RH non-condensing. The product is intended for indoor environments.
Typical use. It allows remote restarting of a gateway, router or camera without physical access to the site, reducing unnecessary site visits, through a LoRaWAN link that requires neither SIM nor WiFi connection.