RAK4260 – EU868 LoRa evaluation board with I2C, SPI and UART interfaces

EU868 LoRa evaluation board with I2C, SPI and UART interfaces

Microcontroller Development Boards

  • LoRaWAN
Manufacturer part number
315008
Manufacturer
RAKwireless

RAKwireless RAK4260 evaluation board for the EU868 band, built on the RAK4260 LoRa module with RUI firmware, designed for LPWAN firmware development and testing.

Product overview

Overview. The RAKwireless RAK4260 is an EU868 LoRa evaluation board combining the RAK4261 and the RAK5005 WisBlock base board. It gives access to all serial and GPIO ports for easy configuration, and the module includes the RAK Unified Interface (RUI) to develop and test firmware quickly.

Main characteristics. LoRa transmit power up to 20 dBm and maximum sensitivity of -136 dBm, with 17 mA typical receive current. In sleep mode the consumption is 860 nA with a backup voltage of 3.3 V. Measured consumption is 13.6 mA in receive at 37.5 kbps, and 33.1 mA, 95.6 mA and 126.3 mA in transmit at 14 dBm, 17 dBm and 20 dBm respectively.

Interfaces and connectivity. The board offers I2C, SPI, ADC, UART and GPIO interfaces. The UART3_RX and UART3_TX pins and GPIOs PA06 to PA09 are exposed on the board, and the SWDIO and SWCLK lines allow programming.

Power and compliance. This version is set for the EU868 band. The board is CE and FCC certified. A compatible Emulator Kit is required to use it.

Typical uses. Prototyping and testing of LoRaWAN-connected sensors or actuators, thanks to the accessible serial and GPIO interfaces.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote