Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RAK3244 – LoRa development board with 32-bit microcontroller

LoRa development board with 32-bit microcontroller

Microcontroller Development Boards

  • LoRaWAN
Manufacturer part number
315014
Manufacturer
RAKwireless

RAKwireless RAK3244 development board in Feather form factor, with a low-power LoRa module and a 32-bit microcontroller for LoRa/LoRaWAN prototyping.

Product overview

Overview. The RAKwireless RAK3244 BastWAN, EU868 band, is a LoRa development board in Feather form factor, designed for LoRa/LoRaWAN prototyping. It is delivered fully assembled, tested and programmed with the UF2 USB bootloader.

Main characteristics. The core of the board is the RAK4260 module, which integrates a 48 MHz SAML21 32-bit microcontroller and a LoRa transceiver. The supported frequency range is 862 to 1020 MHz, with receive sensitivity down to -148 dBm and maximum transmit power up to 20 dBm. Memory comprises 256 KB of FLASH and 32 KB of RAM, plus 2 MB of SPI Flash. An ATECC608A crypto authentication chip is also integrated.

Interfaces and connectivity. The board provides native USB with serial port debugging, 20 IO pins on pin headers with PWM, hardware Serial, hardware I2C and hardware SPI support, 6 x 12-bit analog inputs and 1 x 10-bit analog output (DAC).

Power and environment. The board includes a 3.3V regulator with 500mA peak current output and a built-in 100mA LiPo charger with charging status indicator LED. A Micro-USB port is present. Dimensions: 5.08 x 2.286 cm; weight: 6.9 g.

Typical uses. The board suits rapid prototyping of LoRa/LoRaWAN sensor and actuator projects, thanks to its expansion pins and support for the Arduino environment and the LoRa/LoRaWAN stack.

Integration. Hardware and firmware are open source. The UF2 bootloader appears as a virtual disk drive and is BOSSA compatible, allowing programming from the Arduino IDE or MakeCode. The package includes a LoRa antenna, a Micro-USB cable and a set of jumper wires.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote