RAK4270 – LoRa breakout board with STM32L071 MCU and SX1262, US915 band

LoRa breakout board with STM32L071 MCU and SX1262, US915 band

Microcontroller Development Boards

  • -40°C to +85°C
  • 2.0V ~ 3.6V
  • US915
  • CE, IC
Manufacturer part number
316003
Manufacturer
RAKwireless
Temperature range
-40°C to +85°C
Supply voltage
2.0V ~ 3.6V

RAKwireless breakout board giving access to the pins of the RAK4270 LoRa module (STM32L071 and SX1262) for debugging, in the US915 band version.

Product overview

Overview. The RAKwireless RAK4270 breakout board gives access to the pins of the RAK4270 module over two rows of 2.54 mm headers, for easy debugging. The module combines an STM32L071 MCU with an ARM Cortex-M0+ core and an SX1262 LoRa chip, in the US915 band version.

Main characteristics. The module is supplied from 2.0 V to 3.6 V. Its consumption is 2.31 μA typical in the US915 condition at 3.3 V, and 1.61 μA minimum at 2.0 V. It supports the EU433, CN470, IN865, EU868, AU915, US915, KR920 and AS923 bands, with 21 dBm transmit output power and 124 mA transmit current on PA_BOOST. The operating temperature range is -40 °C to +85 °C.

Interfaces and connectivity. The module provides an AT command UART, an I2C interface and GPIO pins. Connector J1 exposes the SWDIO and SWCLK lines for programming, and connector J2 provides the VDD supply, ground and the MCU_NRST reset pin.

Power and certifications. The supply voltage on the VDD pin is 2.0 to 3.3 V. The product is CE and IC certified.

Typical uses. This board suits development and testing of LoRa nodes in the US915 band, including connecting sensors over I2C or UART and firmware debugging over SWD.

Integration. The wireless technology is LoRa, with LoRaWAN compatibility and point-to-point communication support.

See all specifications

Highlights

  • Frequency band: US915
  • Supply voltage: 2.0V ~ 3.6V
  • Certifications: CE, IC
  • Core: ARM 32-bit Cortex – M0+ with MPU
  • I/O ports: UART/I2C/GPIO
  • Model: RAK4270

Typical applications

Derived from the part category, not a compatibility statement.

Good to know before integrating

  • Power: plan for a supply compatible with 2.0V ~ 3.6V.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote