RAK3244 – LoRa development board with RAK4260 module in Feather format

LoRa development board with RAK4260 module in Feather format

Microcontroller Development Boards

  • US915
  • 5.08 x 2.286 cm
  • 6.9 g
  • LoRa
Manufacturer part number
316008
Manufacturer
RAKwireless
Frequency band
US915
Model
RAK3244

RAK3244 (BastWAN) LoRa development board in Feather format, built around the RAK4260 module with US915 frequency band, for prototyping LoRa and LoRaWAN solutions.

Product overview

Overview. The RAK3244, also called BastWAN, is a RAKwireless development board in Feather form factor built around the ultra-low-power RAK4260 module, designed for rapid prototyping of LoRa and LoRaWAN solutions. It is delivered fully assembled, tested and programmed with the UF2 USB bootloader.

Main characteristics. The RAK4260 module runs at 48 MHz with 3.3 V logic and power, with 256 KB of flash and 32 KB of RAM. The frequency band is US915 and receive sensitivity goes down to -148 dBm, with a maximum transmit power of 20 dBm and a typical receive current of 17 mA. LoRa, (G)FSK and (G)MSK modulations are supported.

Interfaces and connectivity. The board provides 20 I/O pins on pin headers, with PWM, hardware serial, hardware I2C and hardware SPI support. It includes 6 x 12-bit analog inputs, one 10-bit analog output (DAC), native USB with serial port debugging, and a red LED on pin 13. An ATECC608A crypto authentication chip and 2 MB of SPI flash complete the design.

Power and environment. A 3.3 V regulator delivers a 500 mA peak output current. A built-in 100 mA LiPo charger with charging status LED is included, and the board connects through a Micro-USB port. Dimensions are 5.08 x 2.286 cm for a weight of 6.9 g.

Typical uses. Its interfaces and compatibility with existing expansion cards make it suitable for rapid prototyping of communicating sensors and actuators over LoRa. It is fully supported in the Arduino environment with a LoRa/LoRaWAN compatible stack.

Integration. The UF2 firmware appears as a virtual disk drive and is reprogrammed by drag and drop. The bootloader is BOSSA compatible and can be used with the Arduino IDE or MakeCode. The package includes a LoRa antenna, a Micro-USB cable and a set of jumper wires.

See all specifications

Highlights

  • Frequency band: US915
  • Model: RAK3244
  • Product Dimension: 5.08 x 2.286 cm
  • Product Weight: 6.9 g
  • Wireless technologies: LoRa

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote