RAK4200 – AU915 LoRa breakout board with 2.54 mm headers

AU915 LoRa breakout board with 2.54 mm headers

Microcontroller Development Boards

  • LoRaWAN
Manufacturer part number
317006
Manufacturer
RAKwireless

RAKwireless RAK4200 breakout board for the AU915 LoRa module, transferring the module pinout to 2.54 mm headers for development and testing.

Product overview

Overview. The RAKwireless RAK4200 breakout board (AU915 / RAK4200(H)) is a development board that gives access to the pins of the RAK4200 module to simplify development and testing. Its Xbee form factor transfers the module pinout to 2.54 mm headers.

Main characteristics. The module integrates an STM32L071 microcontroller and an SX1276 LoRa chip, with an ARM 32-bit Cortex M0+ core with MPU. It operates in the 433 to 470 MHz and 863 to 923 MHz ranges, and is set here to the AU915 band.

Interfaces and connectivity. The available interfaces are UART, I2C and GPIO. UART2 carries the AT commands, and the SWD port is used for programming. LoRa point-to-point communication is supported, and the module complies with LoRaWAN 1.0.2 protocols.

Power and environment. The supply voltage is 2.0 to 3.6 V and the temperature range is -40°C to +85°C. In LoRa receive mode at 37.5 kbps, consumption is 15 mA. In LoRa transmit at 17 dBm it is 87 mA, and at 19 dBm 120 mA. Sleep consumption is 8.66 µA at 3.3 V for the EU868 band, 9.40 µA for US915 and 7.88 µA for CN470.

Typical uses. The module suits low-power, long-range IoT applications such as home automation, sensor networks, building automation and personal area networks.

Integration. The UART2 and I2C pins allow the module to be connected to a host system to control it and integrate LoRa communication.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote