Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RAK3244 – LoRa Feather development board with SAML21 microcontroller

LoRa Feather development board with SAML21 microcontroller

Microcontroller Development Boards

  • LoRaWAN
Manufacturer part number
317007
Manufacturer
RAKwireless

RAKwireless RAK3244 Feather-format development board built around the RAK4260 LoRa module for AU915, with a 48 MHz microcontroller, for LoRa and LoRaWAN prototyping.

Product overview

Overview. The RAKwireless RAK3244, reference 317007, is a Feather-format development board built around the ultra-low-power RAK4260 module for the AU915 band. It is based on the Microchip R34 LoRa System-in-Package, which combines a 48 MHz SAML21 32-bit microcontroller and a LoRa transceiver.

Main characteristics. The board provides 256 KB of flash and 32 KB of RAM, a 2 MB SPI flash and an ATECC608A crypto authentication chip. It includes a 3.3 V regulator with 500 mA peak output, a built-in 100 mA LiPo charger with charging status LED, a reset button and a power/enable pin.

Interfaces and connectivity. Twenty IO pins are available on pin headers, with PWM, hardware serial, hardware I2C and hardware SPI support. The board offers six 12-bit analog inputs and one 10-bit analog output (DAC). It provides native USB support alongside a Micro-USB port. Receive sensitivity goes down to -148 dBm and maximum transmit power reaches 20 dBm.

Power and environment. The board operates with 3.3 V logic and power and includes a LiPo battery charger. Its dimensions are 5.08 x 2.286 cm and its weight is 6.9 g.

Typical uses. This board suits rapid prototyping of LoRa and LoRaWAN sensor and actuator nodes, thanks to its numerous pins and compatibility with existing expansion cards.

Integration. Firmware is reprogrammed by drag and drop with the UF2 bootloader, which is BOSSA compatible, and the Arduino environment is fully supported with a LoRa/LoRaWAN stack. The package includes a LoRa antenna, a Micro-USB cable and a set of jumper wires.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote