RAK5010-BG95 – NB-IoT GPS Tracker with LTE Cat M1 and BLE 5.0

NB-IoT GPS Tracker with LTE Cat M1 and BLE 5.0

GPS Asset Trackers

  • 1575.42 MHz
  • 500 mA
  • 10 mA
  • 2 A
Manufacturer part number
410010
Manufacturer
RAKwireless
Frequency Range
1575.42 MHz
Charging current
500 mA

The RAK5010-BG95 is a RAKwireless NB-IoT GPS tracker built around a Quectel BG95-M3 module, with LTE Cat M1 and NB1 connectivity, GNSS and BLE 5.0 for position tracking indoors and outdoors.

Product overview

Overview. The RAKwireless RAK5010-BG95 is an NB-IoT GPS tracker, sold as the WisTrio NB-IoT Tracker Pro, built around the Quectel BG95-M3 module and a Nordic nRF52840 microcontroller. It combines LTE Cat M1 and NB1 cellular connectivity, a GNSS receiver and BLE, which allows location-based services outdoors and indoors.

Main characteristics. The cellular module supports LTE Cat M1 with a 1.4 MHz RF bandwidth and LTE Cat NB1 with a 200 kHz RF bandwidth. BLE 5.0 offers data rates of 2 Mbps, 1 Mbps, 500 Kbps and 125 Kbps, with a receive sensitivity of 95 dBm in BLE 1 Mbps mode. The processor is a 32-bit ARM Cortex-M4 with FPU at 64 MHz, with 1 MB of flash and 256 KB of RAM.

Sensors and interfaces. The RAK5010-BG95 version integrates a humidity and temperature sensor, a pressure sensor, a 3-axis motion sensor and an ambient light sensor. Extension IOs allow adding more sensors. Interfaces include I2C, UART, GPIO and ADC, with MHF connectors for the LTE and GNSS antennas.

Power and environment. The board is powered by micro USB or a 3.7 V rechargeable battery, with a supply voltage of 3.3 V to 4.3 V and a 5 V solar panel port. The operating temperature range is -35 °C to +75 °C.

Typical uses. This product suits rapid prototyping of applications requiring NB-IoT connectivity, such as position tracking and sensor telemetry. Application development is supported in the GCC environment.

Integration. The BG95-M3 cannot use the cellular connection and GNSS location acquisition at the same time: the cellular connection must be stopped before starting location acquisition. AT commands remain compatible with the previous BG96 version.

See all specifications

Highlights

  • Current consumption: 4.8 mA in Tx, 4.6 mA in Rx, and 1.5 uA in Sleep Mode
  • Antenna Type: PCB
  • BG95-M3_AP READY: P0.30
  • BG95-M3_CTS: P0.11
  • BG95-M3_DTR: P0.26
  • BG95-M3_PSM: P0.03

Typical applications

Derived from the part category, not a compatibility statement.

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All GPS Asset Trackers
Request a quote