The RAK2247 is a multichannel LoRaWAN concentrator module in mPCIe format with an SX1308 core and SPI interface, for the RU864 version of the LoRaWAN network. It provides multichannel reception for LoRaWAN gateways.
Frequency bandRU864
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, IC, KC, RCM, REACH, RoHS
DIDigital input
DODigital input
Inclusions1pc RAK2247
Product overview
Overview. The RAK2247 from RAKwireless is a multichannel LoRaWAN concentrator module in a 52-pin mPCIe card form factor, the evolution of the RAK833. It is compatible with the 3.3 V mPCIe slots common for 3G/LTE modules and supports the LoRaWAN 1.0.2 stack.
Main characteristics. Transmit power reaches 25 dBm and RX sensitivity goes down to -139 dBm. A heat-sink and a second SAW improve stability and interference resistance compared with the RAK833. This version uses the SX1308 core with a SPI interface and works on RU864. With the SX1308 core, the operating ambient temperature is from 0 to +70 °C.
Interfaces and connectivity. The module connects to a host via SPI, and its pinout is laid out for a 40-pin Raspberry Pi: SPI bus (MOSI, MISO, CLK, CE0), I2C bus for the built-in MAX-7Q GPS module, UART, reset and standby signals. The mPCIe to USB adapter provides a plug-and-play setup.
Dimensions and certifications. The module measures 30 mm x 50.95 mm and weighs 100 g. It is CE, FCC, IC, KC, RCM, REACH and RoHS certified.
Typical uses. LoRaWAN gateway built around a Raspberry Pi host or an equipment fitted with a mPCIe connector, for receiving LoRaWAN sensors and connected objects in the RU864 version.
The RAK2247 is a multichannel LoRaWAN concentrator module in mPCIe format with an SX1308 core and SPI interface, for the RU864 version of the LoRaWAN network. It provides multichannel reception for LoRaWAN gateways.
Frequency bandRU864
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, IC, KC, RCM, REACH, RoHS
DIDigital input
DODigital input
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
RU864
Certifications
CE, FCC, IC, KC, RCM, REACH, RoHS
DI
Digital input
DO
Digital input
Inclusions
1pc RAK2247
IO
Bidirectional
Model
RAK2247
NC
No Connection
OC
Open collector
OD
Open drain
PI
Power input
PO
Power input
Product Dimensions
30mm x 50.95mm
Product Weight
100g (3.5oz)
Variant
SPI
Version
SX1308
Wireless technologies
LoRaWAN, Mini PCIe
Applications and use cases
Architectures in which 513018 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 513018 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
RAK2247 Gateway Concentrator Module for LoRaWAN, SX1301/SX1308 LoRa Core (SPI or USB, GPS) — EU433 / SX1301 / SPI
1
Raspberry Pi 40-Pin Connector: 3V3; RAK2247 Pi HAT PIN: NC; Remarks: No Connection
10
Raspberry Pi 40-Pin Connector: GPIO15 (RXD0); RAK2247 Pi HAT PIN: UART_TXD_ MAX-7Q; I/O: DO; Remarks: Connect to RAK2247 Pi HAT built in GPS Module (MAX-7Q)’s UART_TXD
11
Raspberry Pi 40-Pin Connector: GPIO17 (GPIO_GEN0); RAK2247 Pi HAT PIN: RESET_RAK2247; I/O: DI; Remarks: Connect to SX1301’s RESET PIN, SX1301 reset input, Active high, ≥100 ns for SX1301 reset
12
Raspberry Pi 40-Pin Connector: GPIO18 (GPIO_GEN1); RAK2247 Pi HAT PIN: NC; Remarks: No Connection
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details