RAK2287 – SPI gateway concentrator module for LoRaWAN with GPS, 9XX MHz

SPI gateway concentrator module for LoRaWAN with GPS, 9XX MHz

LoRaWAN Concentrator Cards (mPCIe / SPI)

  • SPI With GPS
  • Digital input
  • Digital output
  • Bidirectional
Manufacturer part number
516000
Manufacturer
RAKwireless
Interface
SPI With GPS
Certifications
anatel, CE, FCC, IC, KC, WPC

The RAK2287 is a LoRaWAN gateway concentrator module in mini-PCIe form factor, based on the SX1302 chip, designed to add LoRaWAN gateway capability to an embedded board, router or host board through an SPI interface.

Product overview

Overview. The RAKwireless RAK2287 is a LoRaWAN concentrator module in mini-PCIe form factor, based on the Semtech SX1302 LoRa chip, in its SPI version with GPS and 9XX MHz band for US915/AU915/KR920/AS923. It integrates into an embedded platform, router or host board to add LoRaWAN gateway capability.

Main characteristics. The module offers up to 10 programmable parallel demodulation paths, an 8 x 8 channel LoRa packet detector, 8 x SF5-SF12 and 8 x SF5-SF10 LoRa demodulators. It detects packets at 8 different spreading factors and 10 channels, with continuous demodulation of up to 16 packets. The manufacturer states support for up to 500 nodes per km² in moderate interference.

Interfaces and connectivity. The SPI interface connects the module to the host, using the SPI_MOSI, SPI_MISO, SPI_CLK and SPI_CE signals. The module includes a ZOE-M8Q GPS for GNSS and time synchronization, connected to the host by a UART link and by the GPS reset and standby lines.

Power and environment. The module is powered at 5 V from the host. It is certified anatel, CE, FCC, IC, KC and WPC.

Typical uses. This module suits the building of LoRaWAN gateways for IoT applications, with time synchronization provided by the built-in GPS.

Integration. The pinout is documented for a 40-pin Raspberry Pi connector, including the GPIO, SPI, UART and reset lines of the SX1302 and the GPS.

See all specifications

Highlights

  • Frequency band: 9XX MHz for US915/AU915/KR920/AS923
  • Certifications: anatel, CE, FCC, IC, KC, WPC
  • DI: Digital input
  • DO: Digital output
  • Interface: SPI With GPS
  • IO: Bidirectional

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote