8-channel LoRaWAN concentrator module in M.2 3042 form factor, turning an industrial PC or IoT gateway into a LoRaWAN gateway for 9XX MHz bands.
Frequency band9XX MHz for US915/AU915/KR920/AS923
AsiaAS923
AustraliaAU915
CertificationsCE, FCC, IC
DIDigital input
DODigital output
Product overview
Overview. The RAK5166 from RAKwireless is an 8-channel LoRa concentrator in M.2 Key B and Key M-Type 3042 form factor, based on the SX1303. It turns industrial PCs and IoT gateways into LoRaWAN gateways, and its M.2 format keeps space usage low in densely packed industrial environments.
Main characteristics. This version supports Listen Before Talk (LBT), has no GPS and works on 9XX MHz for US915, AU915, KR920 and AS923. The module is supplied at 3.3 V, with a maximum input voltage of 3.6 V.
Interfaces and connectivity. The module provides a USB interface (USB_D+ and USB_D-, 90 Ω differential impedance) and a host UART link (HOST_UART_TX and HOST_UART_RX). The configuration pins CONFIG_0 to CONFIG_3 and the MCU_RESET signal are reserved.
Power and environment. Typical consumption is 81.6 mA in RX mode and 512 mA in TX mode at 27 dBm with a 3.3 V supply. The module is CE, FCC and IC certified.
Typical uses. This concentrator suits LoRaWAN gateways built into industrial equipment or embedded PCs, for collecting sensor data on 9XX MHz bands.
Integration. The module is available on quotation from Atlas Electronics.
Description: Storage temperature; Min: -40° C; Max: 85° C
USB
Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6 V
Applications and use cases
Architectures in which 516033 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 516033 and the other parts of your project.
Answers to the questions that the recorded characteristics of 516033 can answer. A question is not asked when nothing is recorded to answer it.
1Does it include GNSS/GPS?
Yes — recorded under "Feature": LBT Non-GPS.
2Does it have a USB interface?
Yes — recorded under "USB": Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6 V.
3What is the operating temperature range?
Min: -40° C; Typical: +25° C; Max: +85° C; Remarks: Normal operating temperature range (fully functional and meet 3GPP specifications) (source: Normal operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
516033
8-channel SX1303 LoRaWAN Concentrator M.2 Module with LBT
RAK2247 Gateway Concentrator Module for LoRaWAN, SX1301/SX1308 LoRa Core (SPI or USB, GPS) — EU433 / SX1301 / SPI
1
Raspberry Pi 40-Pin Connector: 3V3; RAK2247 Pi HAT PIN: NC; Remarks: No Connection
10
Raspberry Pi 40-Pin Connector: GPIO15 (RXD0); RAK2247 Pi HAT PIN: UART_TXD_ MAX-7Q; I/O: DO; Remarks: Connect to RAK2247 Pi HAT built in GPS Module (MAX-7Q)’s UART_TXD
11
Raspberry Pi 40-Pin Connector: GPIO17 (GPIO_GEN0); RAK2247 Pi HAT PIN: RESET_RAK2247; I/O: DI; Remarks: Connect to SX1301’s RESET PIN, SX1301 reset input, Active high, ≥100 ns for SX1301 reset
12
Raspberry Pi 40-Pin Connector: GPIO18 (GPIO_GEN1); RAK2247 Pi HAT PIN: NC; Remarks: No Connection
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details