The RAK833 is a LoRaWAN concentrator module in mini PCI Express form factor, based on the SX1301, for gateways and network equipment in the AU915 band.
Frequency bandAU915
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, Lead-Free
ModelRAK833
Product Weight0.1kg
VariantSPI/USB
Product overview
Overview. The RAK833 from RAKwireless is a LoRaWAN concentrator module in a 52-pin mini PCI Express (mPCIe) form factor, based on the SX1301. It offers the functions of the larger RAK831 module in a smaller footprint.
Main characteristics. The SX1301 provides 8 uplink and 1 downlink LoRa demodulation paths. The maximum transmit power is 20 dBm and the receive sensitivity is -136 dBm. The full LoRaWAN 1.0.2 stack is supported. The module is supplied for the AU915 band.
Interfaces and connectivity. The module provides an SPI interface (clock up to 10 MHz) and, depending on the variant, a USB interface (D+ and D- lines with 90-ohm nominal differential impedance). It is compatible with 3.3 V mPCIe slots, common on 3G/LTE modules.
Power and environment. The 3.3Vaux supply input accepts -0.3 to 3.6 V. The normal operating temperature range is -20 to +65 °C, and the extended range is -40 to +85 °C. The module is CE and FCC certified and lead-free.
Typical uses. The module suits integration into third-party routers, development boards and measurement equipment, for small series testing and integration. It targets smart metering fixed networks and Internet of Things applications with up to 500 nodes per square kilometre in a moderately interfered environment.
Integration. Product dimensions: 30 mm x 50.95 mm; weight: 0.1 kg. The module ships with an MHF antenna.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for 517014, with where it comes from. Use the filters to find one quickly.
All specifications (23)
Characteristic
Value
Frequency band
AU915
3.3Vaux
Description: Module supply voltage; Condition: Input DC voltage at 3.3Vaux pins; Min: –0.3; Max: 3.6; Unit: V
Active Mode (RX)
Condition: TX disabled and shutdown PA.; Type: TBD; Unit: mA
Active Mode (TX)
Condition: The power of TX channel is 23 dBm and 3.3 V supply.; Type: TBD; Unit: mA
Certifications
CE, FCC, Lead-Free
ESD immunity for ANT1
Max: 4000; Unit: V; Remarks: Contact Discharge according to IEC 61000-4-2
ESD sensitivity for all pins except ANT1
Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
ESD sensitivity for ANT1
Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
Extended operating temperature
Min: –40; Max: +85; Unit: ° C; Remarks: Extended operating temperature range (RF performance may be affected outside normal operating range, though module is fully functional)
GPS_PPS
Description: GPS 1 pps input; Condition: Input DC voltage at GPS_PPS input pin; Min: –0.3; Max: 3.6; Unit: V
Idle Mode
Condition: All of the chip on the board enter idle mode or shutdown.; Min: 60; Type: 100; Unit: uA
Model
RAK833
Normal operating temperature
Min: –20; Typical: +25; Max: +65; Unit: ° C; Remarks: Normal operating temperature range (fully functional and meet 3GPP specifications)
Product Dimensions
30mm x 50.95mm
Product Weight
0.1kg
Reset
Description: RAK833 reset input; Condition: Input DC voltage at RESET input pin; Min: –0.3; Max: 3.6; Unit: V
The RAK833 is a LoRaWAN concentrator module in mini PCI Express form factor, based on the SX1301, for gateways and network equipment in the AU915 band.
Frequency bandAU915
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, Lead-Free
ModelRAK833
Product Weight0.1kg
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
AU915
3.3Vaux
Description: Module supply voltage; Condition: Input DC voltage at 3.3Vaux pins; Min: –0.3; Max: 3.6; Unit: V
Active Mode (RX)
Condition: TX disabled and shutdown PA.; Min: -; Type: TBD; Max: -; Unit: mA
Active Mode (TX)
Condition: The power of TX channel is 23 dBm and 3.3 V supply.; Min: -; Type: TBD; Max: -; Unit: mA
Certifications
CE, FCC, Lead-Free
ESD immunity for ANT1
Min: -; Typical: -; Max: 4000; Unit: V; Remarks: Contact Discharge according to IEC 61000-4-2
ESD sensitivity for all pins except ANT1
Min: -; Typical: -; Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
ESD sensitivity for ANT1
Min: -; Typical: -; Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
Extended operating temperature
Min: –40; Typical: -; Max: +85; Unit: ° C; Remarks: Extended operating temperature range (RF performance may be affected outside normal operating range, though module is fully functional)
GPS_PPS
Description: GPS 1 pps input; Condition: Input DC voltage at GPS_PPS input pin; Min: –0.3; Max: 3.6; Unit: V
Idle Mode
Condition: All of the chip on the board enter idle mode or shutdown.; Min: 60; Type: 100; Max: -; Unit: uA
Model
RAK833
Normal operating temperature
Min: –20; Typical: +25; Max: +65; Unit: ° C; Remarks: Normal operating temperature range (fully functional and meet 3GPP specifications)
Product Dimensions
30mm x 50.95mm
Product Weight
0.1kg
Reset
Description: RAK833 reset input; Condition: Input DC voltage at RESET input pin; Min: –0.3; Max: 3.6; Unit: V
Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6; Unit: V
Variant
SPI/USB
Wireless technologies
LoRaWAN, Mini PCIe
Applications and use cases
Architectures in which 517014 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 517014 and the other parts of your project.
Answers to the questions that the recorded characteristics of 517014 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support SPI?
Yes — recorded under "SPI": Description: SPI interface; Condition: Input DC voltage at SPI interface pin; Min: –0.3; Max: 3.6; Unit: V.
2Does it include GNSS/GPS?
Yes — recorded under "GPS_PPS": Description: GPS 1 pps input; Condition: Input DC voltage at GPS_PPS input pin; Min: –0.3; Max: 3.6; Unit: V.
3Does it support LoRaWAN?
Yes — recorded under "Wireless technologies": LoRaWAN, Mini PCIe.
4Does it have a USB interface?
Yes — recorded under "USB": Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6; Unit: V.
5What is the operating temperature range?
Min: –40; Typical: -; Max: +85; Unit: ° C; Remarks: Extended operating temperature range (RF performance may be affected outside normal operating range, though module is fully functional) (source: Extended operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
517014
LoRaWAN gateway concentrator mPCIe module SPI/USB AU915 band
RAK2247 Gateway Concentrator Module for LoRaWAN, SX1301/SX1308 LoRa Core (SPI or USB, GPS) — EU433 / SX1301 / SPI
1
Raspberry Pi 40-Pin Connector: 3V3; RAK2247 Pi HAT PIN: NC; Remarks: No Connection
10
Raspberry Pi 40-Pin Connector: GPIO15 (RXD0); RAK2247 Pi HAT PIN: UART_TXD_ MAX-7Q; I/O: DO; Remarks: Connect to RAK2247 Pi HAT built in GPS Module (MAX-7Q)’s UART_TXD
11
Raspberry Pi 40-Pin Connector: GPIO17 (GPIO_GEN0); RAK2247 Pi HAT PIN: RESET_RAK2247; I/O: DI; Remarks: Connect to SX1301’s RESET PIN, SX1301 reset input, Active high, ≥100 ns for SX1301 reset
12
Raspberry Pi 40-Pin Connector: GPIO18 (GPIO_GEN1); RAK2247 Pi HAT PIN: NC; Remarks: No Connection
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details