Multichannel LoRaWAN concentrator module in mPCIe format, with SX1301 core, SPI interface and AS923 version for building LoRaWAN gateways.
Frequency bandAS923
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, IC, KC, RCM, REACH, RoHS
DIDigital input
DODigital input
Inclusions1pc RAK2247
Product overview
Overview. The RAKwireless RAK2247 is a multichannel LoRaWAN concentrator module in 52-pin mPCIe card format, using the SX1301 core with a SPI interface in its AS923 version. It is the evolution of the RAK833 and is supplied with a Raspberry Pi adapter kit.
Main characteristics. Transmit power reaches 25 dBm and RX sensitivity goes down to -139 dBm. A heat-sink and a second SAW improve stability and interference resistance compared with the RAK833. The LoRaWAN 1.0.2 stack is supported. Dimensions are 30 mm x 50.95 mm and weight is 100 g.
Interfaces and connectivity. The module communicates with the host over SPI (SPI_MOSI, SPI_MISO, SPI_CLK, SPI_CE). A MAX-7Q GPS module built into the Pi HAT adapter is connected over I2C and UART and has its own reset and standby signals.
Power and environment. The module is powered at 3.3 V from the mPCIe slots and the Pi HAT adapter accepts a 5 V input. The operating ambient temperature with the SX1301 core ranges from -40 to +85 °C.
Typical uses. The module is used to build a multichannel LoRaWAN gateway, with plug-and-play setup when combined with the mPCIe to USB adapter.
Integration. The 40-pin Raspberry Pi connector pinout is documented. The module is certified CE, FCC, IC, KC, RCM, REACH and RoHS.
Multichannel LoRaWAN concentrator module in mPCIe format, with SX1301 core, SPI interface and AS923 version for building LoRaWAN gateways.
Frequency bandAS923
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, IC, KC, RCM, REACH, RoHS
DIDigital input
DODigital input
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
AS923
Certifications
CE, FCC, IC, KC, RCM, REACH, RoHS
DI
Digital input
DO
Digital input
Inclusions
1pc RAK2247
IO
Bidirectional
Model
RAK2247
NC
No Connection
OC
Open collector
OD
Open drain
PI
Power input
PO
Power input
Product Dimensions
30mm x 50.95mm
Product Weight
100g (3.5oz)
Variant
SPI
Version
SX1301
Wireless technologies
LoRaWAN, Mini PCIe
Applications and use cases
Architectures in which 519002 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 519002 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
519002
Multichannel LoRaWAN Concentrator Module, SX1301 with SPI Interface
RAK2247 Gateway Concentrator Module for LoRaWAN, SX1301/SX1308 LoRa Core (SPI or USB, GPS) — EU433 / SX1301 / SPI
1
Raspberry Pi 40-Pin Connector: 3V3; RAK2247 Pi HAT PIN: NC; Remarks: No Connection
10
Raspberry Pi 40-Pin Connector: GPIO15 (RXD0); RAK2247 Pi HAT PIN: UART_TXD_ MAX-7Q; I/O: DO; Remarks: Connect to RAK2247 Pi HAT built in GPS Module (MAX-7Q)’s UART_TXD
11
Raspberry Pi 40-Pin Connector: GPIO17 (GPIO_GEN0); RAK2247 Pi HAT PIN: RESET_RAK2247; I/O: DI; Remarks: Connect to SX1301’s RESET PIN, SX1301 reset input, Active high, ≥100 ns for SX1301 reset
12
Raspberry Pi 40-Pin Connector: GPIO18 (GPIO_GEN1); RAK2247 Pi HAT PIN: NC; Remarks: No Connection
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details