The RAK2245 Stamp Edition from RAKwireless is a LoRaWAN gateway concentrator module for the AS923 band, with 8 uplink and 1 downlink LoRa demodulation paths.
Frequency RangeMin: 863 MHz; Max: 870 MHz
Frequency bandAS923
Board Dimensions60mm x 30mm x 14.9mm
Package InclusionsRAK2245 Stamp Edition Board only
Package Weight0.3kg (0.66lb.)
AsiaAS923
Product overview
RAK2245 Stamp Edition LoRaWAN concentrator — RAKwireless offers the RAK2245 Stamp Edition, a LoRaWAN concentrator module (mPCIe / SPI card) with model RAK2245 for the AS923 band.
Main characteristics. The module is built around a SX1301 baseband processor with two SX1257/58 front-ends, giving 8 uplink and 1 downlink LoRa demodulation paths. It provides a maximum transmit power of 27 dBm and a receive sensitivity of -139 dBm at spreading factor 12. The full LoRaWAN 1.0.2 stack is supported, and an additional SAW filter improves noise resistance.
Interfaces and connectivity. The module connects to a Raspberry Pi through its 40-pin header (2 mm pitch, compatible with 96Boards): SPI bus (MOSI, MISO, CLK, CS), UART, I²C bus for the HAT ID EEPROM, plus the reset signals for the SX1301 and the integrated u-blox MAX-7Q GPS module.
Power and environment. The module is powered at 5 V, with a typical supply voltage of 5.0 V (range -0.3 V to 5.5 V). Typical consumption is 360 mA in receive and 336 mA in transmit. The operating temperature range is -40 °C to +85 °C. The module is certified CE, FCC and RoHS.
Typical uses. This concentrator serves as a complete RF front end for a LoRaWAN gateway, for example in smart grid, smart farm or other IoT systems, and for rapid prototyping and small-series manufacturing.
Integration. The module is supplied as a bare board and its compact 60 mm x 30 mm x 14.9 mm size suits space-constrained applications. Available on quotation from Atlas Electronics.
The RAK2245 Stamp Edition from RAKwireless is a LoRaWAN gateway concentrator module for the AS923 band, with 8 uplink and 1 downlink LoRa demodulation paths.
Frequency RangeMin: 863 MHz; Max: 870 MHz
Frequency bandAS923
Board Dimensions60mm x 30mm x 14.9mm
Package InclusionsRAK2245 Stamp Edition Board only
Package Weight0.3kg (0.66lb.)
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
AS923
Active Mode (RX)
Condition: TX Disabled and RX Enabled; Typical: 360 mA
Active Mode (TX)
Condition: TX Enabled and RX Disabled; Typical: 336 mA
Asia
AS923
Australia
AU915
Board Dimensions
60mm x 30mm x 14.9mm
Board Weight
Approximately 0.75 oz
Certifications
CE, FCC, RoHS
China
CN470
ESD immunity for ANT1
Max: 4 kV; Remarks: Contact Discharge according to IEC 61000-4-2; Max: 8 kV; Remarks: Air Discharge according to IEC 61000-4-2
ESD sensitivity for all pins except ANT1
Max: 1 kV; Remarks: Human Body Model according to JESD22-A114
ESD sensitivity for ANT1
Max: 1 kV; Remarks: Human Body Model according to JESD22-A114
Check the exact pin assignment and the application circuit in the datasheet, or ask our experts.
Implementation checklist
Thermal : rated operating range Description: Temperature Range; Min.: -40° C; Max: +85° C — check it against the installation environment.
Applications and use cases
Architectures in which 519003 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 519003 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
RAK2247 Gateway Concentrator Module for LoRaWAN, SX1301/SX1308 LoRa Core (SPI or USB, GPS) — EU433 / SX1301 / SPI
1
Raspberry Pi 40-Pin Connector: 3V3; RAK2247 Pi HAT PIN: NC; Remarks: No Connection
10
Raspberry Pi 40-Pin Connector: GPIO15 (RXD0); RAK2247 Pi HAT PIN: UART_TXD_ MAX-7Q; I/O: DO; Remarks: Connect to RAK2247 Pi HAT built in GPS Module (MAX-7Q)’s UART_TXD
11
Raspberry Pi 40-Pin Connector: GPIO17 (GPIO_GEN0); RAK2247 Pi HAT PIN: RESET_RAK2247; I/O: DI; Remarks: Connect to SX1301’s RESET PIN, SX1301 reset input, Active high, ≥100 ns for SX1301 reset
12
Raspberry Pi 40-Pin Connector: GPIO18 (GPIO_GEN1); RAK2247 Pi HAT PIN: NC; Remarks: No Connection
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details