The RAK833 is a LoRaWAN concentrator module in mini PCIe format for integration into routers, development boards and measurement equipment in the AS923 band.
Frequency bandAS923
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, Lead-Free
ModelRAK833
Product Weight0.1kg
VariantSPI/USB
Product overview
RAK833. The RAK833 LoRaWAN concentrator module from RAKwireless is a LoRa concentrator in mini PCIe format (52-pin mPCIe), based on the SX1301, for the AS923 frequency band.
Main characteristics. The module provides 8 uplink and 1 downlink LoRa demodulation paths. Maximum transmit power is 20 dBm and receive sensitivity is -136 dBm. It supports the full LoRaWAN 1.0.2 stack. Dimensions are 30 mm x 50.95 mm for a weight of 0.1 kg.
Interfaces and connectivity. The module is offered in the SPI/USB variant. It has a host SPI interface (PCIe_SCK, PCIe_MISO, PCIe_MOSI and PCIe_CSN, up to 10 MHz) and USB 2.0 data lines D+ and D- with a nominal differential impedance of 90 ohms. A GPS_PPS input is connected to the SX1301.
Power and environment. Power is supplied at 3.3 V through the 3.3Vaux pins, with an admissible input voltage of -0.3 to 3.6 V. The normal operating temperature range is -20 °C to +65 °C, and -40 °C to +85 °C in the extended range. The module is certified CE and FCC and is lead-free.
Typical uses. The RAK833 suits fixed smart metering networks and Internet of Things applications, up to 500 nodes per square kilometre in a moderately interfered environment. It can be integrated into third-party routers, development boards or measurement equipment, and used with an mPCIe to USB adapter for a plug-and-play setup.
Integration. The module is compatible with common 3.3 V mPCIe slots used for 3G/LTE modules. It is supplied with an MHF antenna.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for 519014, with where it comes from. Use the filters to find one quickly.
All specifications (23)
Characteristic
Value
Frequency band
AS923
3.3Vaux
Description: Module supply voltage; Condition: Input DC voltage at 3.3Vaux pins; Min: –0.3; Max: 3.6; Unit: V
Active Mode (RX)
Condition: TX disabled and shutdown PA.; Type: TBD; Unit: mA
Active Mode (TX)
Condition: The power of TX channel is 23 dBm and 3.3 V supply.; Type: TBD; Unit: mA
Certifications
CE, FCC, Lead-Free
ESD immunity for ANT1
Max: 4000; Unit: V; Remarks: Contact Discharge according to IEC 61000-4-2
ESD sensitivity for all pins except ANT1
Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
ESD sensitivity for ANT1
Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
Extended operating temperature
Min: –40; Max: +85; Unit: ° C; Remarks: Extended operating temperature range (RF performance may be affected outside normal operating range, though module is fully functional)
GPS_PPS
Description: GPS 1 pps input; Condition: Input DC voltage at GPS_PPS input pin; Min: –0.3; Max: 3.6; Unit: V
Idle Mode
Condition: All of the chip on the board enter idle mode or shutdown.; Min: 60; Type: 100; Unit: uA
Model
RAK833
Normal operating temperature
Min: –20; Typical: +25; Max: +65; Unit: ° C; Remarks: Normal operating temperature range (fully functional and meet 3GPP specifications)
Product Dimensions
30mm x 50.95mm
Product Weight
0.1kg
Reset
Description: RAK833 reset input; Condition: Input DC voltage at RESET input pin; Min: –0.3; Max: 3.6; Unit: V
The RAK833 is a LoRaWAN concentrator module in mini PCIe format for integration into routers, development boards and measurement equipment in the AS923 band.
Frequency bandAS923
Product Dimensions30mm x 50.95mm
CertificationsCE, FCC, Lead-Free
ModelRAK833
Product Weight0.1kg
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
AS923
3.3Vaux
Description: Module supply voltage; Condition: Input DC voltage at 3.3Vaux pins; Min: –0.3; Max: 3.6; Unit: V
Active Mode (RX)
Condition: TX disabled and shutdown PA.; Min: -; Type: TBD; Max: -; Unit: mA
Active Mode (TX)
Condition: The power of TX channel is 23 dBm and 3.3 V supply.; Min: -; Type: TBD; Max: -; Unit: mA
Certifications
CE, FCC, Lead-Free
ESD immunity for ANT1
Min: -; Typical: -; Max: 4000; Unit: V; Remarks: Contact Discharge according to IEC 61000-4-2
ESD sensitivity for all pins except ANT1
Min: -; Typical: -; Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
ESD sensitivity for ANT1
Min: -; Typical: -; Max: 1000; Unit: V; Remarks: Human Body Model according to JESD22-A114
Extended operating temperature
Min: –40; Typical: -; Max: +85; Unit: ° C; Remarks: Extended operating temperature range (RF performance may be affected outside normal operating range, though module is fully functional)
GPS_PPS
Description: GPS 1 pps input; Condition: Input DC voltage at GPS_PPS input pin; Min: –0.3; Max: 3.6; Unit: V
Idle Mode
Condition: All of the chip on the board enter idle mode or shutdown.; Min: 60; Type: 100; Max: -; Unit: uA
Model
RAK833
Normal operating temperature
Min: –20; Typical: +25; Max: +65; Unit: ° C; Remarks: Normal operating temperature range (fully functional and meet 3GPP specifications)
Product Dimensions
30mm x 50.95mm
Product Weight
0.1kg
Reset
Description: RAK833 reset input; Condition: Input DC voltage at RESET input pin; Min: –0.3; Max: 3.6; Unit: V
Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6; Unit: V
Variant
SPI/USB
Wireless technologies
LoRaWAN, Mini PCIe
Applications and use cases
Architectures in which 519014 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 519014 and the other parts of your project.
Answers to the questions that the recorded characteristics of 519014 can answer. A question is not asked when nothing is recorded to answer it.
1Does it support SPI?
Yes — recorded under "SPI": Description: SPI interface; Condition: Input DC voltage at SPI interface pin; Min: –0.3; Max: 3.6; Unit: V.
2Does it include GNSS/GPS?
Yes — recorded under "GPS_PPS": Description: GPS 1 pps input; Condition: Input DC voltage at GPS_PPS input pin; Min: –0.3; Max: 3.6; Unit: V.
3Does it support LoRaWAN?
Yes — recorded under "Wireless technologies": LoRaWAN, Mini PCIe.
4Does it have a USB interface?
Yes — recorded under "USB": Description: USB D+/D- pins; Condition: Input DC voltage at USB interface pins; Min: -; Max: 3.6; Unit: V.
5What is the operating temperature range?
Min: –40; Typical: -; Max: +85; Unit: ° C; Remarks: Extended operating temperature range (RF performance may be affected outside normal operating range, though module is fully functional) (source: Extended operating temperature).
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
519014
LoRaWAN concentrator module mPCIe SPI/USB, AS923 band
RAK2247 Gateway Concentrator Module for LoRaWAN, SX1301/SX1308 LoRa Core (SPI or USB, GPS) — EU433 / SX1301 / SPI
1
Raspberry Pi 40-Pin Connector: 3V3; RAK2247 Pi HAT PIN: NC; Remarks: No Connection
10
Raspberry Pi 40-Pin Connector: GPIO15 (RXD0); RAK2247 Pi HAT PIN: UART_TXD_ MAX-7Q; I/O: DO; Remarks: Connect to RAK2247 Pi HAT built in GPS Module (MAX-7Q)’s UART_TXD
11
Raspberry Pi 40-Pin Connector: GPIO17 (GPIO_GEN0); RAK2247 Pi HAT PIN: RESET_RAK2247; I/O: DI; Remarks: Connect to SX1301’s RESET PIN, SX1301 reset input, Active high, ≥100 ns for SX1301 reset
12
Raspberry Pi 40-Pin Connector: GPIO18 (GPIO_GEN1); RAK2247 Pi HAT PIN: NC; Remarks: No Connection
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details