Product overview
RAKwireless WisGate Connect Smart Building — IoT edge gateway built on the Raspberry Pi Compute Module 4, intended for smart buildings, connected homes and offices. Overview — The CM4 module is supplied with 2GB RAM, 16GB eMMC and a WiFi6 AX210N module. The device comes in a ruggedized 1U rack-mountable sheet metal enclosure, suited to installation in an office, a utility room or an industrial site. Connectivity — One 1 GB Ethernet port with optional PoE and one 2.5 GB Ethernet port are available, together with one USB 2.0 port, two USB 3.0 ports and a Type-C USB socket for updating the CM4. The device provides three mPCIe slots, one M.2 B-Key interface, two WisBlock IO connectors and up to six SMA antenna connectors. This reference does not include LoRaWAN connectivity. Power and environment — Several power inputs are provided: DC terminal, Phoenix terminal and optional PoE. A 5 V and 12 V output is available when PoE is used, and a standard fan connector compatible with 12 V and 5 V fans is provided, selected by jumper cap. Interfaces and configuration — Two MIPI CSI-2 camera FPC connectors, an HDMI 2.0 output, a MIPI DSI display FPC connector, a debug UART port, a Raspberry Pi HAT connector, an RTC with battery socket and wake-up support for the CM4, and an OLED status screen. Jumpers enable or disable WiFi and BLE, EEPROM write and the buzzer. Typical uses — Suitable for offices, utility rooms, industrial sites and edge installations, with mounting possible on vertical surfaces or inside control cabinets. Integration — Wall mounting hardware is included, and DIN rail mounting on 35 mm rail is possible with an optional kit. The RAKPiOS operating system, based on Raspberry Pi OS and including Docker, is used to configure the network and deploy IoT services.