RAK7394 – LoRaWAN developer gateway with LTE Cat 4 and SX1302 concentrator

LoRaWAN developer gateway with LTE Cat 4 and SX1302 concentrator

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • 5 ± 2 mA
  • IN865
  • Specifications: 0±10
  • CM4-2GB RAM 16GB eMMC
Manufacturer part number
714097
Manufacturer
RAKwireless
Storage Temperature Range
Min.: -40° C; Max.: +85° C
Frequency Range
Min.: 863 MHz; Max.: 870 MHz

RAKwireless RAK7394 LoRaWAN developer gateway based on the Raspberry Pi CM4 module and an SX1302 concentrator, with LTE Cat 4 cellular connectivity for the EMEA region.

Product overview

Overview. The RAKwireless RAK7394 is a LoRaWAN developer gateway combining a RAKR314 carrier board, a Raspberry Pi Compute Module 4 with 2 GB RAM and 16 GB eMMC storage, a RAK2287 concentrator and a RAK2287 Pi HAT. The RAK2287 includes a GPS module and a heat sink in an aluminum casing.

Main characteristics. The RAK2287 concentrator uses the Semtech SX1302 chip and its digital signal processing engine. It can receive up to 8 LoRa packets with different spreading factors on different channels. Receive sensitivity is -139 dBm at 125 kHz with spreading factor 12, and transmit power ranges from -6 dBm to 8 dBm depending on the setting. Amplifier gain is 27 dB ± 2.0 and impedance is 50 Ω.

Interfaces and connectivity. This version includes the RAK2013 Cellular Pi HAT, based on the Quectel EG95-E LTE Cat 4 module, with LTE FDD bands B1, B3, B7, B8, B20 and B28A, WCDMA B1 and B8, and GSM/EDGE 900 and 1800 MHz. The RAKR314 carrier board provides two USB 2.0 ports, two USB 3.0 ports, two USB Type-C ports for power and programming, an Ethernet port and an SD card slot, and follows the 40-pin GPIO form factor.

Power and environment. Operating voltage is 3 to 5 V with a DC current of 5 ± 2 mA, and standby power is 550 mA typical. Operating temperature ranges from -10 °C to +55 °C and storage temperature from -40 °C to +85 °C. Dimensions are 92 mm x 68.3 mm x 57.2 mm and weight is 320 to 363 g.

Typical uses. This gateway suits private LoRaWAN network deployments and M2M and IoT prototyping projects, with a cellular link for backhaul or failover.

Integration. The board is compatible with existing Raspberry Pi HATs, and the PoE variant is obtained by adding a RAK9003 Pi HAT. This product is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Frequency band: IN865
  • Asia: AS923
  • Australia: AU915
  • Band support*: 865MHz, 868MHz, 915MHz, 920MHz, 923MHz
  • Burn test mode: Max.: 940 mA
  • China: CN470

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote