RAK7394 – LoRaWAN developer gateway CM4 with LTE Cat 4 and SX1302

LoRaWAN developer gateway CM4 with LTE Cat 4 and SX1302

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • 5 ± 2 mA
  • IN865
  • Specifications: 0±10
  • CM4-4GB RAM-32GB eMMC
Manufacturer part number
714100
Manufacturer
RAKwireless
Storage Temperature Range
Min.: -40° C; Max.: +85° C
Frequency Range
Min.: 863 MHz; Max.: 870 MHz

RAKwireless RAK7394 LoRaWAN developer gateway combining a Raspberry Pi CM4, an SX1302 concentrator and an EG95-E LTE Cat4 module, for the IN865 frequency band.

Product overview

Overview. The RAKwireless RAK7394 WisGate Developer CM4 is a LoRaWAN gateway combining the RAKR314 carrier board, the Raspberry Pi Compute Module 4 (CM4, 4 GB RAM and 32 GB eMMC), the RAK2287 concentrator with SX1302 chip and its Pi HAT with a GPS module, in an aluminium casing.

Main characteristics. The SX1302 concentrator can receive up to 8 LoRa packets with different spreading factors on different channels. The frequency band is IN865, with a receiving range of 863 MHz to 870 MHz and a sensitivity of -139 dBm at 125 kHz with spreading factor 12. Transmit power ranges from -6 dBm to 8 dBm depending on the setting. Antenna gain is -2.0 dBi.

Interfaces and connectivity. The RAKR314 carrier board provides two USB 2.0 ports, two USB 3.0 ports, two USB Type-C ports (power and programming) and an Ethernet port. The SD card slot can serve as extra storage or as a boot source. The EG95-E cellular module provides LTE FDD (bands B1, B3, B7, B8, B20 and B28A), WCDMA (B1 and B8) and GSM/EDGE (900 and 1800 MHz) connectivity.

Power and environment. The DC voltage is 3 to 5 V, with a typical standby power of 550 mA. The operating temperature range is -10 °C to +55 °C and the storage temperature range is -40 °C to +85 °C. Dimensions are 92 mm x 68.3 mm x 57.2 mm for a weight of 320 to 363 g.

Typical uses. This gateway suits LoRaWAN IoT projects requiring data backhaul over the cellular network, as well as the development and evaluation of LoRaWAN networks. The RAK7394P variant, PoE-enabled with the addition of the RAK9003, allows power over Ethernet.

Integration. The RAKR314 follows the Raspberry Pi 4 form factor and provides a standard 40-pin GPIO, compatible with existing HATs.

See all specifications

Highlights

  • Frequency band: IN865
  • Asia: AS923
  • Australia: AU915
  • Band support*: 865MHz, 868MHz, 915MHz, 920MHz, 923MHz
  • Burn test mode: Max.: 940 mA
  • China: CN470

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote