The RAKwireless RAK7371 LoRaWAN gateway converts RAK5146 mPCIe concentrator modules into a USB Type-C device to add EU868 LoRaWAN gateway capability to a PC or an existing system.
Frequency bandEU868
CertificationsREACH, RoHS
ModelRAK7371
Model OptionRAK7371 with RAK5146
Wireless technologiesLoRaWAN
Product overview
Overview. The RAKwireless RAK7371, also designated WisGate Developer Base, is a USB Type-C LoRaWAN gateway that integrates the RAK5146 (SX1303) concentrator module for the EU868 band. It is supplied with a USB Type-C to A cable and a 2.3 dBi LoRa antenna.
Main characteristics. The RAK5146 module provides 8 uplink channels and 1 downlink channel, with receive sensitivity down to -139 dBm at SF12 and BW 125 kHz and transmit power up to 27 dBm. It offers up to 10 programmable parallel demodulation paths and works with spreading factors SF5 to SF12. The board features two SX125x Tx/Rx front-ends.
Interfaces and connectivity. The device connects through a USB Type-C interface compliant with USB 2.0. It supports the license-free frequency bands EU433, CN470, IN865, EU868, US915, AU915, KR920 and AS923.
Typical uses. This gateway suits LPWAN deployments where integration with existing hardware such as routers or industrial PCs is required, as well as on-the-go drive testing and coverage evaluation in mobile scenarios. For example, a laptop can become a LoRaWAN gateway testbed by plugging the device in and running the software stack.
Certifications. The product is compliant with REACH and RoHS regulations.
The RAKwireless RAK7371 LoRaWAN gateway converts RAK5146 mPCIe concentrator modules into a USB Type-C device to add EU868 LoRaWAN gateway capability to a PC or an existing system.
Frequency bandEU868
CertificationsREACH, RoHS
ModelRAK7371
Model OptionRAK7371 with RAK5146
Wireless technologiesLoRaWAN
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
EU868
Certifications
REACH, RoHS
Model
RAK7371
Model Option
RAK7371 with RAK5146
Wireless technologies
LoRaWAN
Applications and use cases
Architectures in which 715034 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Energy bills give one total for the whole site. Submetering places meters and current sensors on each circuit or usage and collects their readings through a gateway, so consumption can be followed per building, floor or machine
To check
Number of circuits and phases to meter, and the current range of each
Wired Modbus bus or wireless LoRaWAN, depending on cabling access in the switchboards
Accuracy class required for internal allocation or for billing
Offices and classrooms get stuffy without anyone measuring why. Indoor air quality monitoring places CO2, VOC and particle sensors in the rooms and reports their values through a gateway, so ventilation can be adjusted to real occupancy
To check
Parameters to measure (CO2 alone or CO2, VOC and particles)
Battery-powered sensors or mains-powered sensors with display
Integration with the ventilation control or building management system
A leak under a sink or in a technical room is often found days later. Leak detection places wireless sensors where water can appear and sends an alert through a gateway as soon as one of them gets wet
To check
Locations at risk: kitchens, bathrooms, plant rooms, server rooms
Alert path (SMS, e-mail, application) and who receives it
Battery life and the way a low battery is reported
A fridge that drifts at night can ruin a whole stock. Temperature loggers in cold rooms and trucks report through a gateway or a tracker and raise an alert when a threshold is crossed
To check
Temperature range and accuracy required by the product
Record keeping required by the applicable regulations
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
A building’s energy, comfort and occupancy data sit in separate systems. Sensors, meters and gateways feed one model of the building, room by room, to compare scenarios and steer the installations
Milesight sensors, LoRaWAN gateways and cellular routers can be brought together on the Milesight Development Platform, which manages the devices and passes their data to other applications through an API and webhooks
To check
Development Platform for device management, API and webhooks, or another network server and application
Devices provisioned through Milesight RPS must have that provisioning removed before being added to the Development Platform
Data flows to the customer’s own application through webhooks
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 715034 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details