RAK7393 – Industrial outdoor LoRaWAN gateway with Raspberry Pi CM4

Industrial outdoor LoRaWAN gateway with Raspberry Pi CM4

Outdoor LoRaWAN Gateways

  • 4G LTE
  • LoRaWAN
Manufacturer part number
715225
Manufacturer
RAKwireless

The RAK7393 WisGate Connect Outdoor is an industrial outdoor IoT gateway based on Raspberry Pi CM4 and compatible with CM5, with LoRaWAN EU868 and mioty, for deploying sensor networks.

Product overview

RAKwireless RAK7393 WisGate Connect Outdoor — outdoor IoT gateway for LoRaWAN and mioty networks — The RAK7393 is a fully industrialized IoT gateway based on the Raspberry Pi Compute Module 4 (CM4, included) and compatible with the CM5. It is designed for real-world deployment in smart cities, smart agriculture and industrial IoT.

Main characteristics. The processor is a Broadcom BCM2711 with 4 cores at a nominal frequency of 1.5 GHz, with an ARMv8 Cortex-A72 64-bit architecture. RAM is 1, 2, 4 or 8 GB DDR4-3200, and eMMC storage is 0, 8, 16 or 32. The operating system is RAKPiOS. The enclosure, in aluminum and plastic, measures 240 x 240 x 89.5 mm.

Interfaces and connectivity. The gateway has a 1 GB Ethernet port with PoE enabled, Wi-Fi 5 (IEEE 802.11 b/g/n/ac) in the 2.4 GHz and 5.0 GHz bands, Bluetooth Low Energy 5.0 and mioty Outdoor Gateway with LoRa (EU868) LPWAN connectivity. The listed wireless technologies are GPS, LoRaWAN, LTE and Wi-Fi, but the version presented has no LTE. Three MiniPCIe slots (USB, UART, GPIO and USIM depending on the slot) allow radio modules to be added. Three nanoSIM slots are provided, one accessible externally. The unit has a USB-C console port, a USB-C flashing port and an SD card slot.

Power and environment. Power is supplied by IEEE 802.3at PoE or by a 9 to 36 VDC input, solar-ready. The operating temperature range is -20º C to 55º C, with an operating humidity of 0 to 95% RH. The ingress protection is IP67 (NEMA-6), and it can be mounted on a pole or a wall. The unit includes a PCB temperature monitor, a voltage monitor, a real-time clock and an ATECC608 security chip.

Typical uses. The gateway suits data collection from soil and crop sensors on remote fields, or air quality and noise monitoring across wide urban areas.

Integration. The USB-C console and flashing ports and the SD card slot simplify on-site configuration and maintenance.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote