Overview. The RAK7393 WisGate Connect Outdoor from RAKwireless is an industrialized outdoor IoT gateway based on the Raspberry Pi Compute Module 4 (CM4) and compatible with CM5. Built for real-world deployment, it differs from prototyping boards through its sealed enclosure and CE, FCC, IC and UKCA certifications.
Main characteristics. Broadcom BCM2711 processor with 4 cores at 1.5 GHz, ARMv8 Cortex-A72 64-bit architecture, 1, 2, 4 or 8 GB DDR4-3200 RAM and 0, 8, 16 or 32 GB eMMC storage. The operating system is RAKPiOS. A real-time clock with battery and an ATECC608 crypto chip are included.
Interfaces and connectivity. 8-channel LoRaWAN gateway for the 8xx MHz bands EU868, IN865 and RU864, with LTE Cat 4 module (EG95-E) for the EMEA region. Wi-Fi 5 (IEEE 802.11 b/g/n/ac) on 2.4 GHz and 5.0 GHz, Bluetooth Low Energy 5.0 and GPS. Three MiniPCIe slots (slot 1 offers USB, UART and GPIO, slots 2 and 3 offer USB and GPIO, slot 3 also offers USIM) and three nanoSIM slots, one accessible externally. One 1 GB Ethernet port with active PoE IEEE 802.3at.
Power and environment. Powered by PoE IEEE 802.3at or 9-36 VDC input, solar-ready. IP67/NEMA-6 enclosure in aluminium and plastic, wall or pole mounting, operating temperature -20 °C to 55 °C and operating humidity 0 to 95 % RH. Board temperature and voltage monitoring included.
Typical uses. Remote agriculture monitoring with local collection of soil and crop sensor data, or air quality and noise monitoring in urban areas. The MiniPCIe slots allow combining LoRaWAN, LTE or other radios according to the application.
Integration. Supplied with the CM4 module, PVC tape, waterproof tape and a PoE injector, depending on the configuration ordered. Available on quotation from Atlas Electronics.