| Dimensions | 310 mm x 290 mm x 146 mm |
| Frequency band | US915 |
| Antenna | LoRa: N-Type connector (one for the 8-channel gateway and two for the 16-channel gateway); GPS: One N-Type connector; Wi-Fi: Two N-Type connectors; LTE: Two N-Type connectors ( only for RAK7285C) |
| Breathable Valve | Pressure balance and moisture control valve; prevents condensation while maintaining enclosure waterproofing. |
| Cellular Feature ( available with RAK7285C ) | Nano SIM Card: 12 x 9 x 0.67 mm; Supports Quectel EG95-NA / EC25-AU (IoT / M2M -optimized LTE Cat 4 Module); LTE Radio: Refer to the LTE Radio Specifications section for detailed information. |
| Certifications | anatel |
| Computing | MT7628, 128 MB DDR2 RAM |
| Console | USB Type-C port for debugging and maintenance |
| Data logger | Network: DHCP Server/Client; Management: MQTT Bridge |
| DC Input | 9~36 V DC power input |
| Diplexer | AU915:; Frequency:; Rx: 915 ~ 920 MHz; Tx: 923 ~ 928 MHz; Insertion loss:; Rx: 2.6 (Typical) / 4.0 (Maximum); Tx: 2.6 (Typical) / 3.8 (Maximum); Isolation between Rx and Tx: > 80 dB; Return loss: < -18 dB; Impedance: 50 Ω; US915:; Frequency:; Rx: 902 ~ 915 MHz; Tx: 923 ~ 928 MHz; Insertion loss:; Rx: 1.3 (Typical) / 1.6 (Maximum); Tx: 1.8 (Typical) / 2.0 (Maximum); Isolation between Rx and Tx: > 90 dB; Return loss: < -18 dB; Impedance: 50 Ω |
| EC25-AU for Latin America, Australia, and New Zealand Region | LTE-FDD: B1 / B2 / B3 / B4 / B5 / B7 / B8 / B28; LTE-TDD: B40; WCDMA: B1/B2/B5/B8; GSM/EDGE: B2 / B3 / B5 / B8 |
| EG95-NA for North America Region | LTE FDD: B2 / B4 / B5 / B12 / B13; WCDMA: B2 / B4 / B5 |
| Enclosure Material | Aluminum |
| ETH | Status: ON; Description: Link is up; Status: OFF; Description: Link is down; Status: Flicker; Description: Data transmitting or receiving |
| ETH (PoE) | 10/100 Mbps Ethernet port with IEEE 802.3at PoE input support |
| Frequency Band Setup | Network: Support 802.1q; Management: Firmware Update |
| Gateway OTA management | Network: Wi-Fi Client mode; Management: WisDM |
| GPS | GPS antenna connector |
| Ground Pad | Provides an earth grounding point for surge protection and EMI shielding. It is recommended to connect this to a reliable ground during installation. |
| High-Density PV Stations | Livestock Management on Large Farms |
| Ingress Protection | IP67 |
| Installation Method | Pole or wall mounting |
| LED Indicators | WLAN, LTE (for LTE version), LoRa1, LoRa2, ETH, PWR indicators for device and module status |
| Location Setup | Network: Wi-Fi AP mode; Management: OpenVPN, Ping Watch Dog |
| LoRa1 | Status: ON; Description: LoRa1 module active; Status: OFF; Description: LoRa1 module inactive; Status: Flicker; Description: Transmitting or receiving LoRa packets |
| LoRa1 / LoRa2 | LoRa® antenna connector |
| LoRa2 | Status: ON; Description: LoRa2 module active; Status: OFF; Description: LoRa2 module inactive; Status: Flicker; Description: Transmitting or receiving LoRa packets |
| LoRa Feature | SX1303 On Board; 8 or 16 LoRa® channels in full-duplex; Frequency: US915 / AU915; Listen Before Talk; LoRa Radio: Refer to the LoRa Radio Specifications section for detailed information. |
| LoRa package forward (packet forwarder, Basics Station) | Network: LTE APN Setup; Management: SSH2, NTP |
| LTE | With LTE cat4(EG95-NA) for North America |
| LTE-DIV | LTE diversity antenna connector (available only on RAK7285C models) |
| LTE-MAIN | LTE main antenna connector (available only on RAK7285C models) |
| Model | RAK7285 |
| NanoSIM | Used for LTE connectivity. Required when using cellular backhaul. Included in all versions, even if LTE is not supported. |
| Operating Conditions | Operating Temperature:-30˚ C to ﹢55˚ C; Storage Temperature:-40˚ C to ﹢85˚ C; Operating Humidity: 0 ~ 95% RH non-condensing; Storage Humidity: 0 ~ 95% RH non-condensing |
| Operating Frequency | ISM band: 2.400-2.4835 (GHz) |
| Operating Humidity | 0~95% RH non-condensing |
| Operating Temperature | -30˚ C to +55˚ C |
| Operation channels | 2.4 GHz: 1-13 |
| Power supply | PoE (IEEE 802.3at): 42~57 V DC; 9~36 V DC; RAK Battery Plus |
| PWR | Status: ON; Description: Gateway is powered on; Status: OFF; Description: Gateway is powered off |
| Receiver Sensitivity (Typical) | 802.11b; 1 Mbps: - 95 dBm; 11 Mbps: - 88 dBm; 802.11g; 6 Mbps: - 90 dBm; 54 Mbps: - 75 dBm; 802.11n (2.4 GHz); MCS0 (HT20): - 89 dBm; MCS7 (HT20): - 72 dBm; MCS0 (HT40): - 86 dBm; MCS7 (HT40): - 68 dBm |
| Reset | - Short press : Reboot the device.; - Long press (≥5 sec) : Factory reset. |
| Server Address and Port Setup | Network: Uplink backup; Management: LoRa Packet Forwarder |
| Statistic | Management: WEB UI |
| Storage humidity | 0~95% RH non-condensing |
| Storage Temperature | -40˚ C to ﹢85˚ C |
| TF Card | Pre-installed 16 GB or 32 GB microSD card for log storage and uplink frame buffering. Capacity may vary by production batch.; ⚠️ WARNING; Do not eject the SD card located in the SD card slot during installation, as it stores logs and data essential for the device' s performance. |
| TX Power Setup | Network: Firewall; Management: Built-in Network Server |
| Wi-Fi Feature | Frequency: 2.4 GHz (802.11b/g/n); Operation Channels: 1-13 (2.4 GHz); 2x2 MIMO; Wi-Fi Radio: Refer to the Wi-Fi Radio Specifications section for detailed information. |
| WiFi | WiFi antenna connector |
| Wireless Standard | IEEE 802.11b/g/n |
| Wireless technologies | GPS, LoRaWAN, LTE, Wi-Fi |
| WLAN | Status: On; Description: Wi-Fi is enabled; either AP mode or STA mode is active.; Status: Off; Description: Wi-Fi is disabled; both AP mode and STA mode are inactive.; Status: Flashing; Description: Data transmitting or receiving |