RAK7394 – CM4 developer LoRaWAN gateway AU915 with LTE Cat 4 and GPS

CM4 developer LoRaWAN gateway AU915 with LTE Cat 4 and GPS

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • 4G LTE
  • LoRaWAN
Manufacturer part number
717138
Manufacturer
RAKwireless

RAKwireless RAK7394 LoRaWAN developer gateway combining RAKR314 carrier board, Raspberry Pi CM4, RAK2287 LoRa concentrator and LTE Cat 4 EG95-E module for the AU915 band.

Product overview

Overview. The RAKwireless RAK7394 LoRaWAN developer gateway, catalogue reference 717138, is a LoRaWAN gateway from the WisGate Developer CM4 series combining a Raspberry Pi Compute Module 4 with 2 GB RAM and 16 GB eMMC, a RAK2287 LoRa concentrator and an LTE Cat 4 EG95-E cellular link, in its EMEA region variant for the AU915 band.

Main characteristics. The RAK2287 concentrator, based on the Semtech SX1302 chip, receives several LoRa packets simultaneously with different spreading factors on different channels. Its frequency range is specified for the AU915 band, with a receive sensitivity of -139 dBm at 125 kHz bandwidth and spreading factor 12, and an adjustable output power from -6 dBm to 8 dBm. The product includes a GPS module and a heat sink in an aluminium casing.

Interfaces and connectivity. The RAKR314 carrier board follows the Raspberry Pi 4 form factor with a standard 40-pin GPIO, two USB 2.0 ports, two USB 3.0 ports, two USB Type-C ports for power and programming, an Ethernet port and an SD card slot. The EG95-E cellular link supports LTE FDD bands B1, B3, B7, B8, B20 and B28A, WCDMA B1 and B8, and GSM/EDGE 900 and 1800 MHz.

Power and environment. DC supply of 3 to 5 V, typical standby consumption of 550 mA. Operating temperature range from -10 °C to +55 °C, storage range from -40 °C to +85 °C, dimensions 92 mm x 68.3 mm x 57.2 mm for a weight of 320 to 363 g.

Typical uses. Prototyping and development of LoRaWAN networks in the AU915 band, with cellular connection for data backhaul.

Integration. The board is compatible with existing HATs. The CM4P version of the same series allows PoE powering with the addition of the RAK9003 Pi HAT; the RAK2013 Cellular Pi HAT is built into this configuration.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote