RAK7394 – LoRaWAN developer gateway with LTE Cat 4 and SX1302 concentrator

LoRaWAN developer gateway with LTE Cat 4 and SX1302 concentrator

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • 5 ± 2 mA
  • KR920
  • Specifications: 0±10
  • CM4-4GB RAM-32GB eMMC
Manufacturer part number
718108
Manufacturer
RAKwireless
Storage Temperature Range
Min.: -40° C; Max.: +85° C
Frequency Range
Min.: 863 MHz; Max.: 870 MHz

RAKwireless RAK7394 developer LoRaWAN gateway combining a Raspberry Pi CM4 module, an SX1302 concentrator and an LTE Cat 4 EG95-E modem, for LPWAN and cellular connectivity.

Product overview

RAK7394 LoRaWAN gateway. The RAKwireless RAK7394 WisGate Developer CM4 is a developer LoRaWAN gateway combining a RAKR314 carrier board, a Raspberry Pi Compute Module 4, a RAK2287 concentrator with Semtech SX1302 chip and a RAK2287 Pi HAT with an integrated GPS module. This EMEA version for the KR920 frequency band comes with the LTE Cat 4 EG95-E modem, CM4 configuration with 4 GB RAM and 32 GB eMMC memory.

Main characteristics. The SX1302 concentrator can receive up to 8 LoRa packets with different spreading factors on different channels. Receiver sensitivity is -139 dBm at 125 kHz with spreading factor 12. Amplifier gain is 27 dB ± 2.0, and output power is 8 dBm.

Connectivity and interfaces. The RAKR314 carrier board follows the Raspberry Pi 4 form factor and provides a standard 40-pin GPIO, two USB 2.0 ports, two USB 3.0 ports, two USB Type-C ports (power and programming), an Ethernet port and an SD card slot. The LTE modem, based on the Quectel EG95 module, supports LTE FDD bands B1, B3, B7, B8, B20 and B28A, WCDMA B1 and B8, and GSM/EDGE 900 and 1800 MHz.

Power and environment. Supply voltage is 3 to 5 V, with a DC current of 5 ± 2 mA. Operating temperature ranges from -10 °C to +55 °C, and storage temperature from -40 °C to +85 °C. Dimensions are 92 mm x 68.3 mm x 57.2 mm for a weight of 320 to 363 g.

Typical uses. LoRaWAN gateway for M2M and IoT development projects, with data backhaul over cellular link thanks to the integrated LTE modem.

Integration. The board is compatible with existing Raspberry Pi form factor HATs, and the CM4P version can be powered over PoE by adding a RAK9003 HAT.

See all specifications

Highlights

  • Frequency band: KR920
  • Asia: AS923
  • Australia: AU915
  • Band support*: 865MHz, 868MHz, 915MHz, 920MHz, 923MHz
  • Burn test mode: Max.: 940 mA
  • China: CN470

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote