Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RAK2013 – LTE Cat 4 Cellular Gateway Kit for Raspberry Pi 4

LTE Cat 4 Cellular Gateway Kit for Raspberry Pi 4

SBC Kits and Bundles

  • 4G LTE
  • LTE-M
  • NB-IoT
Manufacturer part number
810049
Manufacturer
RAKwireless

RAKwireless development kit combining a 4 GB Raspberry Pi 4 with a RAK2013 cellular PiHAT fitted with an EG95-E LTE Cat 4 module, for building cellular IoT gateways.

Product overview

Overview. The RAK Raspberry Pi 4 Kit from RAKwireless is a cellular gateway kit for IoT, built around a Raspberry Pi 4 Model B and the RAK2013 cellular PiHAT fitted with the EG95-E LTE Cat 4 module for the EMEA region.

Main characteristics. The Raspberry Pi 4 features a quad-core Broadcom BCM2711 Cortex-A72 (ARM v8) 64-bit processor at 1.5 GHz and 4 GB of LPDDR4 memory. The kit includes a pre-loaded 64 GB microSD card, an enclosure of 92 x 68.3 x 57.2 mm and two LTE antennas.

Interfaces and connectivity. The Raspberry Pi 4 provides 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0, BLE, Gigabit Ethernet, two USB 3.0 ports and two USB 2.0 ports. The RAK2013 PiHAT supports a Nano SIM card, I2C, GPIO, UART and ADC interfaces, and a MikroBus interface for sensor extension boards. The EG95-E module supports LTE FDD bands B1/2/3/4/5/8/12/13/18/19/20/28, WCDMA, DC-HSPA+, EDGE, GPRS and EGPRS (850/900/1800/1900 MHz). LTE throughput reaches 150 Mb/s downlink and 50 Mb/s uplink.

Power and environment. Power is supplied at 5 V DC through a USB-C connector, minimum 3 A. The Raspberry Pi 4 can also be powered over Ethernet with the separately sold RAK PoE HAT. Operating temperature ranges from 0 to 50 °C. The plug type is UK Standard.

Typical uses. This kit suits the development of an IoT project or a complete cellular gateway, using the UART, I2C and GPIO interfaces of the Raspberry Pi to connect sensors or equipment.

Integration. The RAK2013 supports a USB connector for higher data rates, and integrates an audio codec and audio amplifier. GPS is only available with the BG96 variant, not with the EG95 module.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All SBC Kits and Bundles
Request a quote