RAK2013 – LTE Cat 4 cellular gateway kit for Raspberry Pi 4

LTE Cat 4 cellular gateway kit for Raspberry Pi 4

SBC Kits and Bundles

  • 4GB LPDDR4
  • 850/900/1800/1900MHz.
Manufacturer part number
810050
Manufacturer
RAKwireless
Memory
4GB LPDDR4
DC-HSPA+
Max. 42 (DL)/Max. 5.76 (UL)

RAKwireless development kit pairing a Raspberry Pi 4 with an EG95-E LTE Cat 4 cellular modem to build an IoT cellular gateway. EU plug type.

Product overview

Cellular IoT gateway RAK2013. The RAKwireless 810050 kit combines a Raspberry Pi 4 Model B with a RAK2013 cellular PiHAT fitted with the Quectel EG95-E module, to build an LTE Cat 4 IoT cellular gateway out of the box.

Main characteristics. The Raspberry Pi 4 features a quad-core Broadcom BCM2711 Cortex-A72 64-bit processor at 1.5 GHz and 4 GB of LPDDR4 memory. The kit includes an enclosure measuring 92 x 68.3 x 57.2 mm, a 64 GB micro SD card and a GPS antenna.

Interfaces and connectivity. The Raspberry Pi provides IEEE 802.11b/g/n/ac wireless LAN in 2.4 GHz and 5.0 GHz, Bluetooth 5.0 and BLE, Gigabit Ethernet, two USB 3.0 ports and two USB 2.0 ports. The PiHAT supports a Nano SIM card and the LTE FDD bands B1/2/3/4/5/8/12/13/18/19/20/28, LTE Cat M1, LTE Cat NB1, EGPRS, GPRS, EDGE, WCDMA and DC-HSPA+, with maximum LTE rates of 150 Mbit/s downlink and 50 Mbit/s uplink. The PiHAT also integrates a MikroBus interface and supports the I2C, GPIO, UART and ADC interfaces of the Raspberry Pi.

Power and environment. The kit is powered at 5 V DC through a USB-C connector, minimum 3 A, and supports Power over Ethernet with a separate PoE HAT. The operating temperature range is 0 to 50 °C.

Typical uses. This kit suits IoT project development and the launch of a first IoT cellular gateway, with sensors connected through the I2C, UART or ADC interfaces and data transmitted over the cellular network.

Integration. Heat sinks fitted to the top of the Raspberry Pi 4 are included. The micro SD card is delivered with Raspbian OS pre-loaded.

See all specifications

Highlights

  • Cellular Module: EG95-E LTE Cat 4 for EMEA region (Europe, Middle East, and Africa)
  • DC-HSPA+: Max. 42 (DL)/Max. 5.76 (UL)
  • EDGE: Max. 296 (DL), Max. 236.8 (UL)
  • EGPRS: 850/900/1800/1900MHz.
  • Environment: Operating temperature 0–50ºC
  • GPRS: Max. 107 (DL), Max. 85.6 (UL)

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All SBC Kits and Bundles
Request a quote