Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RAK2013 – LTE Cat 4 cellular gateway kit for Raspberry Pi 4

LTE Cat 4 cellular gateway kit for Raspberry Pi 4

SBC Kits and Bundles

  • 4G LTE
  • LTE-M
  • NB-IoT
Manufacturer part number
810055
Manufacturer
RAKwireless

IoT cellular gateway development kit combining a 4 GB Raspberry Pi 4 and a RAK2013 PiHAT fitted with an EG95-NA LTE Cat 4 modem for the North America region.

Product overview

Overview. The RAKwireless RAK2013 kit combines a Raspberry Pi 4 Model B with 4 GB of LPDDR4 memory and a RAK2013 cellular PiHAT fitted with the EG95-NA LTE Cat 4 modem, the version for the North America region, to build an IoT cellular gateway. The kit includes the Raspberry Pi 4 4 GB, an enclosure measuring 92 x 68.3 x 57.2 mm, a power adapter, the RAK2013 PiHAT, two LTE antennas, a GPS antenna and a 64 GB microSD card.

Main characteristics. The EG95-NA modem supports LTE FDD bands B1/2/3/4/5/8/12/13/18/19/20/28, with a maximum LTE rate of 150 Mbps downlink and 50 Mbps uplink, LTE Cat M1 at 375 Mbps downlink and 375 Mbps uplink, and LTE Cat NB1 at 32 Mbps downlink and 70 Mbps uplink. It also provides DC-HSPA+ up to 42 Mbps downlink and 5.76 Mbps uplink, WCDMA up to 384 kbps in both directions, EDGE up to 296 kbps downlink and 236.8 kbps uplink, and EGPRS in the 850/900/1800/1900 MHz bands.

Interfaces and connectivity. The Raspberry Pi 4 provides 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN, Bluetooth 5.0 and BLE, Gigabit Ethernet, two USB 3.0 ports and two USB 2.0 ports. The RAK2013 PiHAT accepts a Nano SIM card, integrates an audio codec and audio amplifier, a MikroBus interface for a sensor extension board and a USB connector for a higher data rate. It supports the I2C, GPIO, UART and ADC interfaces of the Raspberry Pi, and an EEPROM configures the I/O automatically. GPS is available only with the BG96 module.

Power and environment. Power is supplied at 5 V DC via USB-C connector, minimum 3 A. The plug type is US Standard. The operating temperature range is 0 to 50 ºC. The Raspberry Pi 4 can be powered over Ethernet with a separate PoE HAT.

Typical uses. This kit lets you develop an IoT project or launch a first IoT cellular gateway, for example to connect sensors to a cellular network.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All SBC Kits and Bundles
Request a quote