RAK5860 NB-IoT cellular module based on Quectel BG77, providing LTE Cat M1 and LTE Cat NB2 connectivity for WisBlock boards. It is part of the RAKwireless Light and Color kit.
Frequency band800MHz for EU868/ IN865/ RU864
Cellular ModuleRAK5860 NB-IoT module with Quectel BG77
ModelRAK5860
QuectelBG77
Voltage at Digital PinsMin.: -0.3; Max.: 2.09; Unit: V
Wireless technologiesBluetooth 5, LoRa
Product overview
RAKwireless RAK5860. The RAK5860 is an NB-IoT cellular module built on the Quectel BG77, designed for long-range connectivity applications within the WisBlock ecosystem.
Main characteristics. The module is specified for the 800MHz band for EU868, IN865 and RU864. It supports RU864, IN865, EU868, AU915, US915, KR920 and AS923. It provides LTE Cat M1 and LTE Cat NB2 connectivity, and Bluetooth 5 and LoRa are listed among its wireless technologies.
Interfaces and connectivity. The link with the host board uses a UART, with WIS_TX and WIS_RX for transmission and reception, and WIS_PWRKEY to turn the BG77 on and off, active high. The RI, DTR, TRIG and APREADY signals are also available on the connector.
Power and environment. The module is powered through VBAT, with a supply range from -0.5 V to 4.2 V. The voltage at digital pins is limited to 2.09 V maximum. UART signals operate in the 1.8 V power domain.
Typical uses. The module suits connected sensors and equipment requiring NB-IoT or LTE-M cellular connectivity on a WisBlock board.
Integration. The module mounts on a WisBlock base board and can be used with the RAK4631 from the RAKwireless ecosystem. A 3V3_S pin powers an active GNSS antenna and must be set high in code through IO2 of the WisBlock.
No published question about this part yet. Questions are reviewed before publication.
Complete specifications
Every characteristic recorded for 815098, with where it comes from. Use the filters to find one quickly.
All specifications (15)
Characteristic
Value
Frequency band
800MHz for EU868/ IN865/ RU864
3V3
Description: 3.3 V For Voltage Level Transistor
3V3_S
Description: 3.3 V for GNSS Antenna; Comment: 3V3_S is controlled by IO2 of WisBlock (P1.02 of NRF52840). This pin must be set HIGH in your code so that the active GPS antenna has a power supply and will work.
Cellular Module
RAK5860 NB-IoT module with Quectel BG77
Model
RAK5860
Quectel
BG77
Supported bands
RU864, IN865, EU868, AU915, US915, KR920, and AS923
USB_VBUS
Description: USB Connection Detection; Min.: 1.3; Max.: 1.8; Unit: V
USBPHY_3P3
Description: Power for USB PHY Circuit; Nom.: 3.3; Unit: V
VBAT
Description: Power Supply for the Module; Min.: -0.5; Max.: 4.2; Unit: V
Voltage at Digital Pins
Min.: -0.3; Max.: 2.09; Unit: V
Wireless technologies
Bluetooth 5, LoRa
WIS_PWRKEY
Description: Turn on/off BG77; Comment: Active High
WIS_RX
Description: UART RXD; Comment: BG77 MAIN_TX, 1.8 V power domain
WIS_TX
Description: UART TXD; Comment: BG77 MAIN_RX, 1.8 V power domain
No specification matches.
Last verification : 2026-10-31
Technical documentation
Official documents and the technical data recorded for 815098. For a missing document or a specific revision, our experts send it to you.
RAK5860 NB-IoT cellular module based on Quectel BG77, providing LTE Cat M1 and LTE Cat NB2 connectivity for WisBlock boards. It is part of the RAKwireless Light and Color kit.
Frequency band800MHz for EU868/ IN865/ RU864
Cellular ModuleRAK5860 NB-IoT module with Quectel BG77
ModelRAK5860
QuectelBG77
Voltage at Digital PinsMin.: -0.3; Max.: 2.09; Unit: V
2. Datasheet extract (recorded values)
Parameter
Value
Frequency band
800MHz for EU868/ IN865/ RU864
3V3
Description: 3.3 V For Voltage Level Transistor
3V3_S
Description: 3.3 V for GNSS Antenna; Comment: 3V3_S is controlled by IO2 of WisBlock (P1.02 of NRF52840). This pin must be set HIGH in your code so that the active GPS antenna has a power supply and will work.
Cellular Module
RAK5860 NB-IoT module with Quectel BG77
Model
RAK5860
Quectel
BG77
Supported bands
RU864, IN865, EU868, AU915, US915, KR920, and AS923
USB_VBUS
Description: USB Connection Detection; Min.: 1.3; Nom.: -; Max.: 1.8; Unit: V
USBPHY_3P3
Description: Power for USB PHY Circuit; Min.: -; Nom.: 3.3; Max.: -; Unit: V
VBAT
Description: Power Supply for the Module; Min.: -0.5; Nom.: -; Max.: 4.2; Unit: V
Voltage at Digital Pins
Description: -; Min.: -0.3; Nom.: -; Max.: 2.09; Unit: V
Wireless technologies
Bluetooth 5, LoRa
WIS_PWRKEY
Description: Turn on/off BG77; Comment: Active High
WIS_RX
Description: UART RXD; Comment: BG77 MAIN_TX, 1.8 V power domain
WIS_TX
Description: UART TXD; Comment: BG77 MAIN_RX, 1.8 V power domain
Applications and use cases
Architectures in which 815098 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Seeed SenseCAP sensors connect to Seeed’s SenseCAP cloud platform and app, and Seeed edge computers, camera modules, Grove and XIAO boards complete the chain for custom devices and local processing
To check
SenseCAP cloud platform and app, or the customer’s own network server
Prototype on Grove and XIAO, then move to industrial versions
Local processing on the edge computers or in the cloud
Associated system blocks
SensorsEdge computingDevelopment boards
Need a complete solution?
Send a request for 815098 and the other parts of your project.
Answers to the questions that the recorded characteristics of 815098 can answer. A question is not asked when nothing is recorded to answer it.
1Does it include Bluetooth?
Yes — recorded under "Wireless technologies": Bluetooth 5, LoRa.
2Does it include GNSS/GPS?
Yes — recorded under "3V3_S": Description: 3.3 V for GNSS Antenna; Comment: 3V3_S is controlled by IO2 of WisBlock (P1.02 of NRF52840). This pin must be set HIGH in your code so that the active GPS antenna has a power supply and will work..
3Does it have a USB interface?
Yes — recorded under "USB_VBUS": Description: USB Connection Detection; Min.: 1.3; Nom.: -; Max.: 1.8; Unit: V.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
815098
WisBlock light and color sensor kit with NB-IoT module
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details