Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RAK7267 – Outdoor LoRaWAN Sub-GHz mesh relay gateway with built-in antenna

Outdoor LoRaWAN Sub-GHz mesh relay gateway with built-in antenna

Outdoor LoRaWAN Gateways

  • 4G LTE
  • LoRaWAN
Manufacturer part number
815124
Manufacturer
RAKwireless

Outdoor RAKwireless LoRaWAN gateway with built-in antenna, used as a Sub-GHz mesh relay to extend coverage between gateways. Kit 815124 with 2 relays and 1 LTE border gateway.

Product overview

Overview. The RAKwireless RAK7267 is an outdoor LoRaWAN gateway operating as a Sub-GHz mesh relay, designed to extend LoRaWAN network coverage through gateway-to-gateway communication. Reference kit 815124 includes two relay gateways and one border gateway, with an LTE Cat-4 cellular module for the EMEA region (EG95-E) and an EU power plug.

Main characteristics. The Gateway Mesh protocol, co-developed by ChirpStack and RAKwireless, enables a multi-hop LoRaWAN mesh network, with a maximum of 8 hops and 3 to 4 recommended. Each relay gateway has 8 RX channels and 1 TX channel and uses the SX1303 concentrator. Distance between gateways is between 2 and 10 km depending on locations, and a network typically supports around 1000 sensors depending on topology and messages per day. LoRaWAN versions 1.0.0 to 1.0.4 and 1.1.0 are supported, with standard LoRaWAN security for messages to and from end-devices and a shared key for MIC checking between gateways. The pre-flashed software is ChirpStack Gateway OS with Gateway Mesh protocol.

Connectivity and interfaces. The RAK7267 includes built-in antennas for LoRa, Wi-Fi and GPS, plus a Cat-1 LTE module with GPS location tracking. The RAK7289CV2 border gateway provides multi-backhaul support over Ethernet, Wi-Fi and cellular. Relay SF, BW and TX power are selectable, with channel hopping.

Power and environment. The RAK7267 accepts DC 9-36V input and is compatible with the RAK Battery Plus off-grid system (battery and solar). Its industrial IP67 enclosure is designed for outdoor use and pole mounting.

Typical uses. This type of relay gateway suits extending LoRaWAN coverage over large areas, such as agricultural fields, remote monitoring sites or extensive industrial facilities, when message volume stays in the low thousands per day. LoRaWAN sensor networks can thus be deployed without a wired gateway at each site.

Integration. The mesh network is set up from the relay gateways and the border gateway, which connects to the network server. The product is available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote