RAKwireless RAK7289CV2. outdoor LoRaWAN mesh gateway kit made of a relay gateway and a border gateway, based on the Gateway Mesh protocol co-developed by ChirpStack and RAKwireless.
Network architecture. The Gateway Mesh protocol provides a multi-hop LoRaWAN network that extends coverage well beyond a single-hop gateway. Gateways communicate with each other over Sub-GHz LoRa, between 2 and 10 km apart depending on locations, with a maximum of 8 hops, 3 to 4 recommended.
Main characteristics. Sub-GHz concentrator with 8 RX channels and 1 TX channel built on the SX1303 LoRa core, supporting LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, with selectable SF, BW and TX power for relaying and channel hopping. Typically 1000 sensors per network, depending on topology and messages per day.
Connectivity. Multi-backhaul with Ethernet, Wi-Fi and cellular on the border gateway, EG95-E 800MHz-LTE Cat-4 module for the EMEA region with EU power plug. External LoRa antenna, internal antennas for Wi-Fi and GPS.
Power and environment. DC 9-36V input, compatible with the RAK Battery Plus off-grid system (battery and solar), with dying gasp power failure protection. IP67/NEMA-6 enclosure with cable glands, pole mount.
Supervision and security. Heartbeat messages and info page on the LNS for network monitoring. Standard LoRaWAN security for messages to and from end-devices, with a shared key for MIC checking between gateways.
Typical uses. Coverage of agricultural fields, remote monitoring sites and large industrial facilities where range is the main goal and message volume stays in the low thousands per day.
Integration. Pre-flashed ChirpStack Gateway OS with Gateway Mesh protocol. The sub-band and LoRaWAN region are to be selected according to the manufacturer's frequency table.