Outdoor LoRaWAN gateway kit using multi-hop mesh, with 2.4 GHz relays and an LTE Cat-4 border gateway, to extend sensor network coverage.
End-device radio channels8 RX + 1 TX (subGhz)
Relay radio channels3 RX + 1 TX (2.4 GHz)
BackhaulWi-Fi, Ethernet and LTE (on RAK7229C)
Gateway installationPole mount
Maximum hops8, recommended 3-4
Network monitoringHeartbeat messages Info page on LNS
Product overview
Overview. The RAK7229 from RAKwireless, in this configuration with three relay gateways and one RAK7229C border gateway, forms an outdoor LoRaWAN mesh network developed with ChirpStack on the Gateway Mesh protocol.
Mesh principle. Backhaul between gateways runs on 2.4 GHz LoRa, extending coverage well beyond a standard single-hop LoRaWAN gateway. The network supports up to 8 hops, with 3 to 4 recommended, and a distance of 1 to 2 km between gateways depending on locations.
Radio characteristics. Relay gateways provide 3 RX and 1 TX channels on 2.4 GHz, while the Sub-GHz channels offer 8 RX and 1 TX. The SX1303 concentrator is shared between end-device communication and mesh networking, which may affect overall network capacity. The network typically handles 2000 sensors depending on topology and messages per day. Relay SF, BW and TX power are selectable, with channel hopping.
Connectivity and power. Backhaul relies on Wi-Fi, Ethernet and LTE (RAK7229C). Each gateway has an IP67 / NEMA-6 enclosure, PoE (802.3af) with surge protection, GPS and dying gasp signalling. It can be powered from DC 12V or the Battery Plus off-grid system (battery and solar). Pole mount installation.
Security and monitoring. Standard LoRaWAN security protects messages to and from end-devices, and a shared key enables MIC checking between gateways. Network monitoring uses heartbeat messages and an info page on the LNS. Flooding management applies a per-gateway message ID cache and a per-gateway maximum hop count.
Integration. The gateways run ChirpStack Gateway OS and support LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, with whitelisting. A 5 dBi 2.4 GHz antenna is supplied, with an 8 dBi Sub-GHz antenna depending on the selected configuration.
Outdoor LoRaWAN gateway kit using multi-hop mesh, with 2.4 GHz relays and an LTE Cat-4 border gateway, to extend sensor network coverage.
End-device radio channels8 RX + 1 TX (subGhz)
Relay radio channels3 RX + 1 TX (2.4 GHz)
BackhaulWi-Fi, Ethernet and LTE (on RAK7229C)
Gateway installationPole mount
Maximum hops8, recommended 3-4
2. Datasheet extract (recorded values)
Parameter
Value
Backhaul
Wi-Fi, Ethernet and LTE (on RAK7229C)
Devices per network
Typically 2000 sensors, depending on topology and messages/day
Distance between gateways
Between 1 and 2 km, depending on locations
End-device radio channels
8 RX + 1 TX (subGhz)
Gateway installation
Pole mount
Gateway power
Power adapter Battery Plus compatible (battery+solar)
LoRa Frequency, Cellular Module and Power Plug
2.4GHz and Sub-G 800MHz-LTE Cat-4 for EMEA Region(EG95-E) with EU Power Plug
Maximum hops
8, recommended 3-4
Network flooding management
Per-gateway message ID cache Per-gateway max hop count
Network monitoring
Heartbeat messages Info page on LNS
Network security
Standard LoRaWAN security for messages to/from end-devices Shared key for MIC checking for messages between gateways
Relay configuration
Selectable SF, BW and TX power Channel hopping
Relay radio channels
3 RX + 1 TX (2.4 GHz)
Sub-G Antenna Gain (Default 2.4G Antenna is 5dbi)
8dBi
Applications and use cases
Architectures in which 815172 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Some sites have neither fixed line nor mobile network. A satellite terminal provides the uplink, a router shares it on site, and a LoRaWAN gateway collects the sensors around
Street lights burn at full power all night. Lighting controllers on each luminaire, linked by LoRaWAN, dim, switch and report each light from a central platform
Free parking spaces, lifted manhole covers and full bins are only seen during rounds. Wireless sensors on the road report occupancy, tilt and level through outdoor gateways
To check
Installation on or in the road surface
Radio range from below a vehicle or a cast-iron cover
Diseases and water stress are noticed once the crop is already affected. A weather station, soil probes and sensor nodes in the field report conditions through an outdoor gateway
To check
Crops, plots and measurement depth of the soil probes
Herds on large pastures are hard to locate and follow. GPS collars and trackers on the animals report their position through an outdoor LoRaWAN gateway
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 815172 and the other parts of your project.
Answers to the questions that the recorded characteristics of 815172 can answer. A question is not asked when nothing is recorded to answer it.
1Does it include Wi-Fi?
Yes — recorded under "Backhaul": Wi-Fi, Ethernet and LTE (on RAK7229C).
2Does it have an Ethernet port?
Yes — recorded under "Backhaul": Wi-Fi, Ethernet and LTE (on RAK7229C).
3Does it support 4G/LTE?
Yes — recorded under "Backhaul": Wi-Fi, Ethernet and LTE (on RAK7229C).
4Does it support LoRaWAN?
Yes — recorded under "Network security": Standard LoRaWAN security for messages to/from end-devices Shared key for MIC checking for messages between gateways.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
815172
Outdoor LoRaWAN mesh gateway kit, 2.4 GHz and Sub-GHz
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details