RAK7229C – Outdoor LoRaWAN mesh gateway kit with 2.4 GHz backhaul

Outdoor LoRaWAN mesh gateway kit with 2.4 GHz backhaul

Outdoor LoRaWAN Gateways

  • 8 RX + 1 TX (subGhz)
  • 3 RX + 1 TX (2.4 GHz)
  • Pole mount
  • 8, recommended 3-4
Manufacturer part number
815176
Manufacturer
RAKwireless
End-device radio channels
8 RX + 1 TX (subGhz)
Relay radio channels
3 RX + 1 TX (2.4 GHz)

Outdoor LoRaWAN gateway kit for multi-hop mesh networks, with four RAK7229 relay gateways and one RAK7229C border gateway with LTE Cat-4, extending coverage without wired backhaul.

Product overview

Overview. The RAK7229C is the border gateway of this RAKwireless kit, built on the Gateway Mesh protocol, an open-source protocol co-developed by ChirpStack and RAKwireless. The kit includes four RAK7229 relay gateways and one RAK7229C border gateway, and allows an outdoor LoRaWAN mesh network to be built, with gateway-to-gateway communication over LoRa 2.4 GHz.

Main characteristics. The relays use a 3+1 channel 2.4 GHz concentrator (RAK5148) for gateway-to-gateway communication, while the access link to end devices relies on an 8 channel Sub-GHz concentrator (RAK5146) with an 8 dBi Sub-G antenna; the 2.4 GHz range uses a 5 dBi antenna by default. The network typically supports 2000 sensors, depending on topology and messages per day. Distance between gateways is between 1 and 2 km depending on locations, with a maximum of 8 hops, 3 to 4 being recommended.

Interfaces and connectivity. The backhaul can run over Wi-Fi, Ethernet or LTE, the latter provided by the RAK7229C with an EG95-E Cat-4 module for the EMEA region, supplied with a UK power plug. Power comes from a power adapter, compatible with Battery Plus for battery and solar operation.

Power and environment. The IP67/NEMA-6 industrial-grade enclosure comes with cable glands, and the gateways support PoE 802.3af with surge protection. They accept DC 12V or the Battery Plus off-grid system, and include dying gasp signalling. Installation is by pole mount.

Network management and security. The network is monitored through heartbeat messages and an info page on the LNS. Security follows the standard LoRaWAN scheme for messages to and from end devices, and a shared key is used for MIC checking of messages between gateways. Flooding is controlled by a per-gateway message ID cache and a per-gateway maximum hop count.

Typical uses and integration. This kit suits LoRaWAN sensor coverage over large outdoor areas where a single gateway is not enough. The gateways run ChirpStack Gateway OS, support LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, and offer whitelist filtering.

See all specifications

Highlights

  • Backhaul: Wi-Fi, Ethernet and LTE (on RAK7229C)
  • Devices per network: Typically 2000 sensors, depending on topology and messages/day
  • Distance between gateways: Between 1 and 2 km, depending on locations
  • End-device radio channels: 8 RX + 1 TX (subGhz)
  • Gateway installation: Pole mount
  • Gateway power: Power adapter Battery Plus compatible (battery+solar)

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote