RAKwireless outdoor LoRaWAN mesh gateway kit with Sub-GHz relays and an LTE Cat-4 border gateway for extended sensor networks in North America.
Radio channels8 RX + 1 TX
Built-In AntennasFor LoRa, Wi-Fi, and GPS
Cat-1 LTEGPS included for location tracking
ConnectivityLoRa Sub-GHz and LTE
Gateway installationPole mount
LoRaWAN Versions Supported1.0.0 to 1.0.4, 1.1.0
Product overview
RAKwireless. The outdoor Gateway Mesh kit (reference 816138) includes three relay gateways and one LTE border gateway, for a multi-hop LoRaWAN mesh network in the 900 MHz band with US power plug.
Mesh protocol. Gateway Mesh is an open-source protocol co-developed by ChirpStack and RAKwireless. It enables a multi-hop LoRaWAN mesh network, with a maximum of 8 hops, 3-4 recommended, and distances between gateways of 2 to 10 km depending on locations. Gateway-to-gateway communication uses LoRa Sub-GHz.
Relay gateways. The RAK7267 relay gateways have built-in antennas for LoRa, Wi-Fi and GPS, in a compact industrial IP67 enclosure, and a Cat-1 LTE module. They accept DC 9-36V power input and are compatible with the RAK Battery Plus off-grid system.
Border gateway. The RAK7289CV2 border gateway with LTE provides the backhaul to the network, with Ethernet, Wi-Fi and cellular backhaul support. The EG95-NA Cat-4 LTE module operates in the 900 MHz band for North America.
Reception and security. The eight RX channels and one TX channel of the SX1303 concentrator handle sensor communications and mesh traffic. LoRaWAN versions 1.0.0 to 1.0.4 and 1.1.0 are supported, with standard LoRaWAN security and a shared key for MIC checking between gateways. ChirpStack Gateway OS with the Gateway Mesh protocol is pre-flashed.
Monitoring. Heartbeat messages and an info page on the LNS allow network monitoring. The dying gasp function signals power failures.
Typical uses. This kit suits extended sensor networks over large areas, such as agricultural fields, remote monitoring sites or large industrial facilities, for message volumes in the low thousands per day. As the Sub-GHz band is shared with end devices, network capacity may be reduced.
Installation. Relay gateways are installed on a pole. The kit is available on quotation from Atlas Electronics.
RAKwireless outdoor LoRaWAN mesh gateway kit with Sub-GHz relays and an LTE Cat-4 border gateway for extended sensor networks in North America.
Radio channels8 RX + 1 TX
Built-In AntennasFor LoRa, Wi-Fi, and GPS
Cat-1 LTEGPS included for location tracking
ConnectivityLoRa Sub-GHz and LTE
Gateway installationPole mount
2. Datasheet extract (recorded values)
Parameter
Value
Built-In Antennas
For LoRa, Wi-Fi, and GPS
Cat-1 LTE
GPS included for location tracking
Compact Design
Industrial IP67-rated enclosure for weather resistance
Connectivity
LoRa Sub-GHz and LTE
Devices per network
Typically 1000 sensors, depending on topology and messages/day
Distance between gateways
Between 2 and 10 km, depending on locations
Dying Gasp
Power failure protection with advanced "dying gasp" function
Enclosure
IP67/NEMA-6 industrial-grade enclosure with cable glands
External Antenna or Built-in Antenna Relay Gateway
I prefer a gateway with a built-in antenna for good performance and competitive cost
External Antennas
External LoRa antenna; internal for Wi-Fi, GPS
Gateway installation
Pole mount
Gateway power
Power adapter Battery Plus compatible (battery+solar)
LoRa Frequency, Cellular Module and Power Plug
900MHz-LTE Cat-4 for North America(EG95-NA) with US Power Plug
LoRaWAN Versions Supported
1.0.0 to 1.0.4, 1.1.0
Maximum hops
8, recommended 3-4
Multi-Backhaul Support
Ethernet, Wi-Fi, and Cellular (RAK7289CV2)
Network flooding management
Per-gateway message ID cache Per-gateway max hop count
Network monitoring
Heartbeat messages Info page on LNS
Network security
Standard LoRaWAN security for messages to/from end-devices Shared key for MIC checking for messages between gateways
Power Input
DC 9-36V compatible
Power Options
Compatible with RAK Battery Plus off-grid system
Pre-Flashed Software
ChirpStack Gateway OS with Gateway Mesh protocol
Radio channels
8 RX + 1 TX
Relay configuration
Selectable SF, BW and TX power Channel hopping
Applications and use cases
Architectures in which 816138 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Some sites have neither fixed line nor mobile network. A satellite terminal provides the uplink, a router shares it on site, and a LoRaWAN gateway collects the sensors around
Street lights burn at full power all night. Lighting controllers on each luminaire, linked by LoRaWAN, dim, switch and report each light from a central platform
Free parking spaces, lifted manhole covers and full bins are only seen during rounds. Wireless sensors on the road report occupancy, tilt and level through outdoor gateways
To check
Installation on or in the road surface
Radio range from below a vehicle or a cast-iron cover
Diseases and water stress are noticed once the crop is already affected. A weather station, soil probes and sensor nodes in the field report conditions through an outdoor gateway
To check
Crops, plots and measurement depth of the soil probes
Herds on large pastures are hard to locate and follow. GPS collars and trackers on the animals report their position through an outdoor LoRaWAN gateway
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 816138 and the other parts of your project.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Current productRAKwireless
816138
Outdoor LoRaWAN mesh gateway kit with Sub-GHz backhaul and LTE
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details