RAK7289V2 – Outdoor Mesh LoRaWAN Gateway with Sub-GHz Backhaul

Outdoor Mesh LoRaWAN Gateway with Sub-GHz Backhaul

Outdoor LoRaWAN Gateways

  • 8 RX + 1 TX
  • LoRa Sub-GHz and LTE
  • Pole mount
  • 8, recommended 3-4
Manufacturer part number
816174
Manufacturer
RAKwireless
Radio channels
8 RX + 1 TX
Built-In Antennas
For LoRa, Wi-Fi, and GPS

The RAK7289V2 is an outdoor LoRaWAN relay gateway for the RAKwireless Gateway Mesh protocol, relaying messages between gateways on the Sub-GHz band to extend sensor network coverage.

Product overview

RAK7289V2 mesh LoRaWAN gateway. The RAK7289V2 from RAKwireless is an outdoor LoRaWAN relay gateway designed for ChirpStack Gateway Mesh multi-hop networks. It connects to the RAK7289CV2 border gateway and is installed on a pole.

Main characteristics. Sub-GHz LoRa concentrator with 8 RX channels and 1 TX channel built on the SX1303 core, external LoRa antenna, relay configuration with selectable SF, BW and TX power, and channel hopping. The network supports up to 8 hops, with 3 to 4 recommended, and a distance between gateways of 2 to 10 km depending on locations. Typically 1000 sensors per network, depending on topology and messages per day.

Connectivity and interfaces. Multi-backhaul support over Ethernet, Wi-Fi and cellular on the border gateway. The Gateway Mesh protocol comes pre-flashed with ChirpStack Gateway OS. LoRaWAN versions 1.0.0 to 1.0.4 and 1.1.0 are supported.

Power and environment. DC 9-36 V input, PoE (802.3af) with surge protection or DC 12 V, compatible with the RAK Battery Plus off-grid system. IP67/NEMA-6 enclosure with cable glands. Power failure protection through a dying gasp function.

Typical uses and integration. Monitoring of remote sites, agricultural fields or large industrial facilities where range matters more than message count. Standard LoRaWAN security applies to messages to and from end devices, with a shared key for MIC checking between gateways. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Built-In Antennas: For LoRa, Wi-Fi, and GPS
  • Cat-1 LTE: GPS included for location tracking
  • Compact Design: Industrial IP67-rated enclosure for weather resistance
  • Connectivity: LoRa Sub-GHz and LTE
  • Devices per network: Typically 1000 sensors, depending on topology and messages/day
  • Distance between gateways: Between 2 and 10 km, depending on locations

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote