RAK7289CV2 – Outdoor LoRaWAN mesh gateway with Sub-GHz backhaul

Outdoor LoRaWAN mesh gateway with Sub-GHz backhaul

Outdoor LoRaWAN Gateways

  • 8 RX + 1 TX
  • LoRa Sub-GHz and LTE
  • Pole mount
  • 8, recommended 3-4
Manufacturer part number
816176
Manufacturer
RAKwireless
Radio channels
8 RX + 1 TX
Built-In Antennas
For LoRa, Wi-Fi, and GPS

RAK7289CV2 outdoor LoRaWAN gateway of the RAKwireless mesh network, with Sub-GHz backhaul between gateways and LTE Cat-4 for the border gateway.

Product overview

RAKwireless RAK7289CV2 border gateway. The RAK7289CV2 is an outdoor LoRaWAN border gateway for multi-hop mesh networks (Gateway Mesh), designed to extend coverage beyond a standard single-hop LoRaWAN gateway. It connects the network to the cellular infrastructure and receives the data relayed by the relay gateways. Main characteristics — IP67/NEMA-6 industrial enclosure with cable glands, external LoRa antenna, internal antennas for Wi-Fi and GPS, SX1303 concentrator with 8 RX channels and 1 TX channel, 900 MHz frequency band and LTE Cat-4 EC25-J cellular module with Japan power plug. Connectivity — Sub-GHz LoRa link between gateways, LTE, Ethernet and Wi-Fi multi-backhaul. Supports LoRaWAN versions 1.0.0 to 1.0.4 and 1.1.0, standard LoRaWAN security for messages to and from end-devices, and a shared key for MIC checking between gateways. Power and environment — DC 9-36 V power input, compatible with the RAK Battery Plus off-grid system (battery and solar), and dying gasp function for power failure protection. Pole mount installation. Typical uses — Extended LoRaWAN sensor network on remote or large sites, with a capacity of about 1000 devices depending on topology and messages per day. Integration — Pre-flashed ChirpStack Gateway OS with the Gateway Mesh protocol, maximum of 8 hops (3 to 4 recommended), distance between gateways of 2 to 10 km depending on locations, network monitoring through heartbeat messages and an info page on the LNS. Available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Built-In Antennas: For LoRa, Wi-Fi, and GPS
  • Cat-1 LTE: GPS included for location tracking
  • Compact Design: Industrial IP67-rated enclosure for weather resistance
  • Connectivity: LoRa Sub-GHz and LTE
  • Devices per network: Typically 1000 sensors, depending on topology and messages/day
  • Distance between gateways: Between 2 and 10 km, depending on locations

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote