Limited record: this part has neither specifications nor a datasheet in the catalog yet. It is shown for reference and is not indexed.

RAK7229 – Outdoor LoRaWAN mesh gateway kit, 3 relays and 1 border

Outdoor LoRaWAN mesh gateway kit, 3 relays and 1 border

Outdoor LoRaWAN Gateways

  • 4G LTE
  • LoRaWAN
Manufacturer part number
816211
Manufacturer
RAKwireless

Outdoor LoRaWAN gateway kit for multi-hop mesh networks, with a 2.4 GHz backhaul between relays and an LTE Cat-4 border gateway to extend the coverage of a sensor network.

Product overview

Overview. The RAK7229 from RAKwireless is an outdoor LoRaWAN gateway designed for the Gateway Mesh protocol, co-developed by ChirpStack and RAKwireless. This kit combines three relay gateways and one border gateway to form a multi-hop LoRaWAN network, with gateway-to-gateway communication over 2.4 GHz LoRa.

Main characteristics. Each gateway uses the SX1303 concentrator: 8 sub-GHz LoRa channels (RAK5146) for end devices, and 3 RX channels plus 1 TX channel at 2.4 GHz (RAK5148) for relaying. The enclosure is IP67/NEMA-6 with cable glands, and the gateway includes integrated GPS. Relay configuration allows selectable SF, BW and TX power, along with channel hopping.

Interfaces and connectivity. The backhaul can be Wi-Fi, Ethernet or LTE depending on the model: the RAK7229C border gateway integrates LTE, in the EC25-J Cat-4 version for Japan with a Japan power plug. The gateways accept PoE (802.3af) with surge protection, a DC 12V supply, or the RAK Battery Plus off-grid system for battery and solar power. The sub-GHz LoRa antennas have a 5 dBi gain, and the default 2.4 GHz antenna is also 5 dBi; the Wi-Fi, GPS and LTE antennas are internal.

Capacity and topology. The network typically supports 2000 sensors, depending on topology and messages per day. The distance between gateways is between 1 and 2 km depending on locations, with a maximum of 8 hops, 3 to 4 recommended. Flooding is managed through a per-gateway message ID cache and a per-gateway maximum hop count.

Security and monitoring. Messages to and from end devices use standard LoRaWAN security, and a shared key allows MIC checking between gateways. Monitoring relies on heartbeat messages and an info page on the LNS.

Use and integration. This kit suits extended outdoor sensor networks where data throughput matters more than maximum range. The gateways ship with ChirpStack Gateway OS, supporting LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, with whitelisting. Pole mount installation. This product is available on quotation from Atlas Electronics.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote