RAK7229 – 2.4 GHz Outdoor LoRaWAN Mesh Gateway Kit

2.4 GHz Outdoor LoRaWAN Mesh Gateway Kit

Outdoor LoRaWAN Gateways

  • 8 RX + 1 TX (subGhz)
  • 3 RX + 1 TX (2.4 GHz)
  • Pole mount
  • 8, recommended 3-4
Manufacturer part number
816218
Manufacturer
RAKwireless
End-device radio channels
8 RX + 1 TX (subGhz)
Relay radio channels
3 RX + 1 TX (2.4 GHz)

Outdoor LoRaWAN mesh gateway kit for multi-hop networks, with 2.4 GHz LoRa backhaul between gateways and an LTE border gateway. Available on quotation from Atlas Electronics.

Product overview

RAK7229 LoRaWAN mesh gateway. The RAKwireless 816218 kit combines four RAK7229 relay gateways and one RAK7229C border gateway to build an outdoor LoRaWAN mesh network, based on the open-source Gateway Mesh protocol co-developed by ChirpStack and RAKwireless.

Main characteristics. The multi-hop protocol extends coverage beyond a standard LoRaWAN gateway, with up to 8 hops and a recommended maximum of 3 to 4. The relay gateways use a 2.4 GHz concentrator with 3 RX channels and 1 TX channel, and gateway-to-gateway communication runs over 2.4 GHz LoRa. Each gateway is built on the SX1303 concentrator. The network can typically support 2000 sensors depending on topology and messages per day, with a distance between gateways of 1 to 2 km depending on sites.

Interfaces and connectivity. The RAK7229C border gateway provides Wi-Fi, Ethernet and LTE backhaul, with an EC25-J Cat-4 cellular module for Japan. The relay gateways offer Ethernet, Wi-Fi and PoE 802.3af with surge protection. The sub-GHz 900 MHz concentrator has 8 RX channels and 1 TX channel, and the external antennas are 5 dBi for sub-GHz and 2.4 GHz. A GPS is integrated.

Power and environment. The gateways, in an IP67/NEMA-6 enclosure with cable glands, are powered by PoE, 12 V DC or the Battery Plus off-grid system, compatible with battery and solar. They are designed for pole mounting.

Typical uses. The kit suits extended sensor networks, notably in smart buildings, urban infrastructure and complex sensor networks where backhaul data capacity is crucial. The relay configuration allows selecting the spreading factor (SF), bandwidth (BW) and TX power, with channel hopping and flooding management through a per-gateway message ID cache.

Integration. The gateways run ChirpStack Gateway OS, support LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, and offer whitelist filtering. Security relies on the standard LoRaWAN scheme for end-device messages and a shared key for MIC checking between gateways. The kit is available on quotation from Atlas Electronics.

See all specifications

Highlights

  • Backhaul: Wi-Fi, Ethernet and LTE (on RAK7229C)
  • Devices per network: Typically 2000 sensors, depending on topology and messages/day
  • Distance between gateways: Between 1 and 2 km, depending on locations
  • End-device radio channels: 8 RX + 1 TX (subGhz)
  • Gateway installation: Pole mount
  • Gateway power: Power adapter Battery Plus compatible (battery+solar)

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote