Outdoor LoRaWAN gateway of the RAKwireless mesh network, with 2.4 GHz relay and Sub-GHz 900 MHz concentrator, designed to extend the coverage of a sensor network.
End-device radio channels8 RX + 1 TX (subGhz)
Relay radio channels3 RX + 1 TX (2.4 GHz)
BackhaulWi-Fi, Ethernet and LTE (on RAK7229C)
Gateway installationPole mount
Maximum hops8, recommended 3-4
Network monitoringHeartbeat messages Info page on LNS
Product overview
RAK7229 mesh gateway. The RAK7229 is an outdoor LoRaWAN gateway from RAKwireless, supplied here as one relay gateway and one border gateway for a mesh coverage deployment. It uses the open-source mesh protocol co-developed by ChirpStack and RAKwireless, which enables a multi-hop LoRaWAN network. Main characteristics — IP67/NEMA-6 industrial enclosure with cable glands, SX1303 concentrator, PoE (802.3af) with surge protection or DC 12 V power, GPS and dying gasp. Relay gateways use a 2.4 GHz concentrator with 3 RX and 1 TX channels (RAK5148) and a Sub-GHz concentrator with 8 RX and 1 TX channels (RAK5146). Connectivity and backhaul — The relay communicates with the border gateway over 2.4 GHz. The border gateway RAK7229C provides backhaul over Ethernet, Wi-Fi and LTE Cat-4 (EG95-NA), with internal Wi-Fi, GPS and LTE antennas. The Sub-GHz LoRa antenna has an 8 dBi gain, the default 2.4 GHz antenna being 5 dBi. Power and environment — Power adapter, PoE or Battery Plus off-grid system (battery and solar), pole mount installation. Sizing — Typically 2000 sensors per network depending on topology and messages per day, distance between gateways of 1 to 2 km depending on locations, up to 8 hops (3 to 4 recommended). Security and monitoring — Standard LoRaWAN security for messages to and from end-devices, shared key for MIC checking between gateways, heartbeat messages and info page on the LNS. Integration — Supports LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, with whitelisting, on ChirpStack Gateway OS. Relay SF, BW and TX power are selectable. Available on quotation from Atlas Electronics.
Outdoor LoRaWAN gateway of the RAKwireless mesh network, with 2.4 GHz relay and Sub-GHz 900 MHz concentrator, designed to extend the coverage of a sensor network.
End-device radio channels8 RX + 1 TX (subGhz)
Relay radio channels3 RX + 1 TX (2.4 GHz)
BackhaulWi-Fi, Ethernet and LTE (on RAK7229C)
Gateway installationPole mount
Maximum hops8, recommended 3-4
2. Datasheet extract (recorded values)
Parameter
Value
Backhaul
Wi-Fi, Ethernet and LTE (on RAK7229C)
Devices per network
Typically 2000 sensors, depending on topology and messages/day
Distance between gateways
Between 1 and 2 km, depending on locations
End-device radio channels
8 RX + 1 TX (subGhz)
Gateway installation
Pole mount
Gateway power
Power adapter Battery Plus compatible (battery+solar)
LoRa Frequency, Cellular Module and Power Plug
2.4GHz and Sub-G 900MHz-LTE Cat-4 for North America(EG95-NA) with US Power Plug
Maximum hops
8, recommended 3-4
Network flooding management
Per-gateway message ID cache Per-gateway max hop count
Network monitoring
Heartbeat messages Info page on LNS
Network security
Standard LoRaWAN security for messages to/from end-devices Shared key for MIC checking for messages between gateways
Relay configuration
Selectable SF, BW and TX power Channel hopping
Relay radio channels
3 RX + 1 TX (2.4 GHz)
Sub-G Antenna Gain (Default 2.4G Antenna is 5dbi)
8dBi
Applications and use cases
Architectures in which 816229 can play a role, derived from its category. This is not a compatibility statement: check the specifications against your requirements.
Some sites have neither fixed line nor mobile network. A satellite terminal provides the uplink, a router shares it on site, and a LoRaWAN gateway collects the sensors around
Street lights burn at full power all night. Lighting controllers on each luminaire, linked by LoRaWAN, dim, switch and report each light from a central platform
Free parking spaces, lifted manhole covers and full bins are only seen during rounds. Wireless sensors on the road report occupancy, tilt and level through outdoor gateways
To check
Installation on or in the road surface
Radio range from below a vehicle or a cast-iron cover
Diseases and water stress are noticed once the crop is already affected. A weather station, soil probes and sensor nodes in the field report conditions through an outdoor gateway
To check
Crops, plots and measurement depth of the soil probes
Herds on large pastures are hard to locate and follow. GPS collars and trackers on the animals report their position through an outdoor LoRaWAN gateway
A LoRaWAN project needs sensors, gateways, a network server and an application that work together. Sensor nodes report to indoor or outdoor gateways, which forward the data to the network server and the customer’s platform
To check
Regional frequency plan (EU868, US915 and others)
Network server: public, private or embedded in the gateway
RAKwireless WisGate gateways run WisGateOS 2 and are managed from WisDM, RAKwireless’ cloud device management platform with a built-in network server, alongside RAK sensor nodes, radio modules and concentrators
To check
WisDM built-in network server, or a third-party one (ChirpStack, TTN/TTS, AWS IoT Core, Actility)
Remote configuration and updates of the gateways from WisDM
Regional frequency plan of the gateways and nodes
Associated system blocks
GatewaysSensors and modulesDevelopment boardsMounting
Need a complete solution?
Send a request for 816229 and the other parts of your project.
Answers to the questions that the recorded characteristics of 816229 can answer. A question is not asked when nothing is recorded to answer it.
1Does it include Wi-Fi?
Yes — recorded under "Backhaul": Wi-Fi, Ethernet and LTE (on RAK7229C).
2Does it have an Ethernet port?
Yes — recorded under "Backhaul": Wi-Fi, Ethernet and LTE (on RAK7229C).
3Does it support 4G/LTE?
Yes — recorded under "Backhaul": Wi-Fi, Ethernet and LTE (on RAK7229C).
4Does it support LoRaWAN?
Yes — recorded under "Network security": Standard LoRaWAN security for messages to/from end-devices Shared key for MIC checking for messages between gateways.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
What is recorded about the regulatory status and the life of this part.
Regulatory compliance
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details