RAK7229 – Outdoor LoRaWAN mesh gateway kit, 2.4 GHz backhaul, relay and border

Outdoor LoRaWAN mesh gateway kit, 2.4 GHz backhaul, relay and border

Outdoor LoRaWAN Gateways

  • 8 RX + 1 TX (subGhz)
  • 3 RX + 1 TX (2.4 GHz)
  • Pole mount
  • 8, recommended 3-4
Manufacturer part number
816241
Manufacturer
RAKwireless
End-device radio channels
8 RX + 1 TX (subGhz)
Relay radio channels
3 RX + 1 TX (2.4 GHz)

Outdoor LoRaWAN gateway kit forming a multi-hop mesh network with 2.4 GHz LoRa backhaul, two RAK7229 relay gateways and one RAK7229C border gateway with LTE.

Product overview

RAKwireless RAK7229. outdoor LoRaWAN mesh gateway kit made of two RAK7229 relay gateways and one RAK7229C border gateway.

Principle. The open-source mesh protocol, co-developed by ChirpStack and RAKwireless, enables a multi-hop LoRaWAN network that extends coverage well beyond a single-hop gateway. Gateway-to-gateway backhaul uses the 2.4 GHz band for higher data capacity.

Radio. The gateways use the SX1303 core with 8 RX + 1 TX channels in Sub-G 900 MHz for end-devices and 3 RX + 1 TX channels in 2.4 GHz for relaying. The concentrator is shared between end-device communication and mesh networking, which may affect overall network capacity. An 8 dBi Sub-G antenna is included; the default 2.4 GHz antenna has a gain of 5 dBi.

Connectivity. Wi-Fi, Ethernet and LTE backhaul (on RAK7229C), with EG95-E cellular module, GPS and internal antennas for Wi-Fi, GPS and LTE. The IP67/NEMA-6 enclosure and PoE 802.3af power with surge protection simplify installation. Power from 12 V DC or from the Battery Plus off-grid system (battery and solar).

Performance. Typically 2000 sensors per network, depending on topology and messages per day. Distance between gateways between 1 and 2 km depending on locations. Up to 8 hops, 3 to 4 recommended.

Network management. Flooding control with a per-gateway message ID cache and per-gateway maximum hop count. Heartbeat messages and info page on the LNS for monitoring. Standard LoRaWAN security for end-device messages and a shared key for MIC checking between gateways. Selectable relay parameters (SF, BW, TX power) and channel hopping.

Typical uses. Outdoor IoT networks, urban infrastructure and smart buildings, and complex sensor networks where data throughput matters more than maximum range. Supplied with ChirpStack Gateway OS, supporting LoRaWAN 1.0.0 to 1.0.4 and 1.1.0.

Contents. For each relay gateway: gateway, Ethernet cable gland, PoE injector, mounting brackets, screw set, 2.4 GHz antenna and 8 dBi Sub-G antenna. For the border gateway: equivalent items, with LTE modem.

See all specifications

Highlights

  • Backhaul: Wi-Fi, Ethernet and LTE (on RAK7229C)
  • Devices per network: Typically 2000 sensors, depending on topology and messages/day
  • Distance between gateways: Between 1 and 2 km, depending on locations
  • End-device radio channels: 8 RX + 1 TX (subGhz)
  • Gateway installation: Pole mount
  • Gateway power: Power adapter Battery Plus compatible (battery+solar)

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All Outdoor LoRaWAN Gateways
Request a quote