RAKwireless LoRaWAN mesh gateway. This kit combines three RAK7229 relay gateways and one RAK7229C border gateway to build an outdoor LoRaWAN mesh network. The Gateway Mesh protocol, co-developed by ChirpStack and RAKwireless, extends coverage beyond a single-hop gateway. Relay gateways exchange data over a 2.4 GHz LoRa backhaul, while the border gateway provides the connection to the network.
Main characteristics. SX1303 concentrator shared between end-device communication and mesh networking, 8 sub-GHz channels (RAK5146) for end devices, 3+1 channels at 2.4 GHz (RAK5148) for relaying. Sub-GHz antenna gain of 8 dBi, with a default 2.4G antenna of 5 dBi. The network typically supports 2000 sensors, depending on topology and messages per day. Gateways are spaced 1 to 2 km apart depending on locations, with a maximum of 8 hops, 3 to 4 recommended.
Interfaces and connectivity. Wi-Fi, Ethernet and LTE backhaul (on RAK7229C), integrated GPS, internal antennas for Wi-Fi, GPS and LTE, external antennas for sub-GHz and 2.4 GHz LoRa. PoE 802.3af with surge protection is integrated. Flooding is managed by a per-gateway message ID cache and a per-gateway maximum hop count.
Power and environment. IP67/NEMA-6 industrial enclosure with cable glands, DC 12 V power or Battery Plus off-grid system (battery and solar), dying gasp signal. Pole mount installation.
Security and monitoring. Standard LoRaWAN security for messages to and from end devices, shared key for MIC checking of messages between gateways. Heartbeat messages and an info page on the LNS.
Typical uses. Extended outdoor LoRaWAN sensor networks, urban infrastructure and smart buildings where backhaul data capacity is a key criterion.
Integration. ChirpStack Gateway OS, compatible with LoRaWAN 1.0.0 to 1.0.4 and 1.1.0, with whitelisting. Available on quotation from Atlas Electronics.