910032
Lightning Arrestor for GPS Antenna

Lightning Arrestor for GPS Antenna
This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning.
Product Description
This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning.
For the purpose of protecting the indoor equipment and circuitry connected to the LoRa gateway, you need to install an Ethernet Port Surge Protection Device (SPD).
By adopting a high pass filter, this product can effectively suppress the low-frequency interference induced by lightning while letting through the GPS signal with low insertion loss. A transient suppression device (TSD) and a gas discharge tube (GDT) is adopted for the protection of the DC feed circuit
Key Features
Connector Type: N-type male to N-type female Impedance: 50 Ω Frequency Range: 1500-1650 MHz Power Loss: ≤ 0.3 dB Ingress Protection: IP65
Packaging
Product Weight: Approximately 200g
Product Dimension: 89mm x 30mm
Documentation
Lightning Arrestor for GPS Antenna Documentation
Become a RAK Affiliate and Earn Today!
Get paid to talk about RAK products! Join the RAK Affiliate program today.
No published question about this part yet. Questions are reviewed before publication.
Official documents and the technical data recorded for 910032. For a missing document or a specific revision, our experts send it to you.
This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
Lightning Arrestor for GPS Antenna

Lightning Arrestor

1 Meter 10 AWG Grounding Wire for Lightning Arrestor

Lightning Arrestor 2 for LoRaWAN®

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 910032 |
| Family | Lightning Arrestor for GPS Antenna |
| Manufacturer | RAKwireless |
Lightning Arresters RF
Two-stage N female to N male RF surge arrestor for LoRaWAN · Ref. : 920467
Price on request
Lightning Arresters RF
RF Lightning Arrestor for Data and Signal Lines
Price on request
Lightning Arresters RF
N-type RF lightning arrestor male to female 50 Ω
Price on request
Lightning Arresters RF
1 Meter 10 AWG Grounding Wire for RF Lightning Arrestor
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details