RP025-4800500 – 1000M PoE Injector 48 V DC 0.5 A, Italy plug

1000M PoE Injector 48 V DC 0.5 A, Italy plug

PoE Injectors

  • Ethernet
  • Power over Ethernet (PoE)
Manufacturer part number
910187
Manufacturer
RAKwireless

RAKwireless PoE injector to power and connect an IEEE 802.3af compatible device over Ethernet, with 48 V DC 0.5 A output and an Italy standard plug.

Product overview

Overview. The RAKwireless PoE injector RP025-4800500 (reference 910187) is a Power over Ethernet injector designed for indoor use. It carries power and data over a single twisted pair cable.

Main characteristics. 48.0 V DC 0.5 A (±5%) output, compliant with IEEE 802.3af, with an Italy standard power plug. The plastic enclosure measures 113.6 x 53.5 x 33.5 mm (±1 mm) and weighs 140 g (±5 g).

Interfaces and connectivity. RJ45 ports 1, 2, 3 and 6 carry the data communication, while pins 4 and 5 are positive and pins 7 and 8 are negative for power. Ports 4, 5, 7 and 8 are not connected to the data signal.

Power and environment. Input 100-240 V AC (50~60 Hz). Operating temperature -20 to 40 ˚C, operating humidity 35~90% RH non-condensing. Storage temperature -30 to 70 ˚C, storage humidity 10~95% RH non-condensing. Mean time before failure of 50,000 hours or more.

Compliance. EMC standards EN55032, EN55013, EN55024, EN55020, FCC Part 15 Class B, GB9254 and GB17625.1, tested according to EN61000-4-4 and EN61000-4-5.

Typical uses. Powering a PoE-enabled gateway, IoT device or single-board computer from an Ethernet network, without a separate power cable.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Similar products

All PoE Injectors
Request a quote