920303
LoRa 470-510 MHz 50 Ohm PCB antenna with MHF-1 connector and cable

- Frequency band
- 470-510 MHz
- BUSY
- nRF52840: P1.14; Function: SX1262 BUSY
- DIO1
- nRF52840: P1.15; Function: SX1262 DIO1
- Impedance
- 50 Ohm
LoRa 470-510 MHz 50 Ohm PCB antenna with MHF-1 connector and cable
RAKwireless 920303 PCB antenna for the 470-510 MHz (CN470) LoRa band, equipped with an MHF-1 connector, 100mm cable, and 50 Ohm impedance.
Overview. The RAKwireless 920303 is a linear-polarization PCB antenna engineered for LoRa and LoRaWAN end devices operating in the 470-510 MHz frequency range (such as the CN470 band). It features a 50 Ohm impedance and a 100mm coaxial lead terminated with an MHF-1 connector.
Compatibility and Form Factor. Measuring 44 x 15 x 0.5 mm for the 470-510MHz band, the antenna is compatible with WisDuo modules RAK4630, RAK11300, and RAK3172, as well as WisBlock Core modules RAK4631, RAK11722, RAK11310, and RAK3372, supporting indoor or enclosure-mounted outdoor installations (-40° C to +85° C).
No published question about this part yet. Questions are reviewed before publication.
Every characteristic recorded for 920303, with where it comes from. Use the filters to find one quickly.
| Characteristic | Value |
|---|---|
| Frequency band | 470-510 MHz |
| ANT_SW | nRF52840: P1.05; Function: SX1262 RF switch power |
| Asia | Frequency (MHz): AS923-1/2/3/4; Core Module: RAK4630(H) |
| Australia | Frequency (MHz): AU915; Core Module: RAK4630(H) |
| BUSY | nRF52840: P1.14; Function: SX1262 BUSY |
| Canada | Frequency (MHz): US915; Core Module: RAK4630(H) |
| China | Frequency (MHz): CN470; Core Module: RAK4630(L) |
| DIO1 | nRF52840: P1.15; Function: SX1262 DIO1 |
| Europe | Frequency (MHz): EU868; Core Module: RAK4630(H) |
| Impedance | 50 Ohm |
| India | Frequency (MHz): IN865; Core Module: RAK4630(H) |
| Korea | Frequency (MHz): KR920; Core Module: RAK4630(H) |
| Model | RAK4630 |
| North America | Frequency (MHz): US915; Core Module: RAK4630(H) |
| NRESET | nRF52840: P1.06; Function: SX1262 reset |
| P1.06 | SX1262 Pin: NRESET; function: NRESET manual reset of the SX1262 |
| P1.10 | SX1262 Pin: NSS; function: SPI NSS |
| P1.11 | SX1262 Pin: SCK; function: SPI CLK |
| P1.12 | SX1262 Pin: MOSI; function: SPI MOSI |
| P1.13 | SX1262 Pin: MISO; function: SPI MISO |
| P1.14 | SX1262 Pin: BUSY; function: BUSY signal |
| P1.15 | SX1262 Pin: DIO1; function: DIO1 event interrupt |
| Polarization | linear |
| RAK4630 | USB, UART1 |
| RAK4630 Module 15 Bytes Data TX Sending | Current Average: 67.8 mA; Condition - Voltage and Dwell Time: 3.6 V 1 second (in RAK5005-O board) |
| RAK4630 Module in LoRaWAN One-Time Sleep | Current Average: 4.23 uA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds |
| RAK4630 Module in One-Time Sleep | Current Average: 4.42 uA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds |
| RAK4630 Module in RX Window Received | Current Average: 2.22 mA; Condition - Voltage and Dwell Time: 3.6 V 1 second (in RAK5005-O board) |
| RAK4630 Module System up in Idle mode | Current Average: 3.35 mA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds |
| SPI_MISO | nRF52840: P1.13; Function: SPI Master in |
| SPI_MOSI | nRF52840: P1.12; Function: SPI Master out |
| SPI_NSS | nRF52840: P1.10; Function: SPI select |
| SPI_SCK | nRF52840: P1.11; Function: SPI clock |
| VBAT_NRF | Description: MCU high voltage power supply; Min.: -0.3; Max.: 5.8; Unit: V |
| VBAT_SX | Description: LoRa chip supply voltage; Min.: -0.5; Max.: 3.9; Unit: V |
| VBAT_SX_IO | Description: LoRa chip supply for I/O pins; Min.: -0.5; Max.: 3.9; Unit: V |
| VBUS | Description: USB supply voltage; Min.: -0.3; Max.: 5.8; Unit: V |
| VDD_NRF | Description: MCU power supply; Min.: -0.3; Max.: 3.9; Unit: V |
| Wireless technologies | LoRa |
No specification matches.
Last verification : 2026-10-31
Official documents and the technical data recorded for 920303. For a missing document or a specific revision, our experts send it to you.
RAKwireless 920303 PCB antenna for the 470-510 MHz (CN470) LoRa band, equipped with an MHF-1 connector, 100mm cable, and 50 Ohm impedance.
| Parameter | Value |
|---|---|
| Frequency band | 470-510 MHz |
| ANT_SW | nRF52840: P1.05; Function: SX1262 RF switch power |
| Asia | Frequency (MHz): AS923-1/2/3/4; Core Module: RAK4630(H) |
| Australia | Frequency (MHz): AU915; Core Module: RAK4630(H) |
| BUSY | nRF52840: P1.14; Function: SX1262 BUSY |
| Canada | Frequency (MHz): US915; Core Module: RAK4630(H) |
| China | Frequency (MHz): CN470; Core Module: RAK4630(L) |
| DIO1 | nRF52840: P1.15; Function: SX1262 DIO1 |
| Europe | Frequency (MHz): EU868; Core Module: RAK4630(H) |
| Impedance | 50 Ohm |
| India | Frequency (MHz): IN865; Core Module: RAK4630(H) |
| Korea | Frequency (MHz): KR920; Core Module: RAK4630(H) |
| Model | RAK4630 |
| North America | Frequency (MHz): US915; Core Module: RAK4630(H) |
| NRESET | nRF52840: P1.06; Function: SX1262 reset |
| P1.06 | SX1262 Pin: NRESET; function: NRESET manual reset of the SX1262 |
| P1.10 | SX1262 Pin: NSS; function: SPI NSS |
| P1.11 | SX1262 Pin: SCK; function: SPI CLK |
| P1.12 | SX1262 Pin: MOSI; function: SPI MOSI |
| P1.13 | SX1262 Pin: MISO; function: SPI MISO |
| P1.14 | SX1262 Pin: BUSY; function: BUSY signal |
| P1.15 | SX1262 Pin: DIO1; function: DIO1 event interrupt |
| Polarization | linear |
| RAK4630 | USB, UART1 |
| RAK4630 Module 15 Bytes Data TX Sending | Current Average: 67.8 mA; Condition - Voltage and Dwell Time: 3.6 V 1 second (in RAK5005-O board) |
| RAK4630 Module in LoRaWAN One-Time Sleep | Current Average: 4.23 uA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds |
| RAK4630 Module in One-Time Sleep | Current Average: 4.42 uA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds |
| RAK4630 Module in RX Window Received | Current Average: 2.22 mA; Condition - Voltage and Dwell Time: 3.6 V 1 second (in RAK5005-O board) |
| RAK4630 Module System up in Idle mode | Current Average: 3.35 mA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds |
| SPI_MISO | nRF52840: P1.13; Function: SPI Master in |
| SPI_MOSI | nRF52840: P1.12; Function: SPI Master out |
| SPI_NSS | nRF52840: P1.10; Function: SPI select |
| SPI_SCK | nRF52840: P1.11; Function: SPI clock |
| VBAT_NRF | Description: MCU high voltage power supply; Min.: -0.3; Max.: 5.8; Unit: V |
| VBAT_SX | Description: LoRa chip supply voltage; Min.: -0.5; Max.: 3.9; Unit: V |
| VBAT_SX_IO | Description: LoRa chip supply for I/O pins; Min.: -0.5; Max.: 3.9; Unit: V |
| VBUS | Description: USB supply voltage; Min.: -0.3; Max.: 5.8; Unit: V |
| VDD_NRF | Description: MCU power supply; Min.: -0.3; Max.: 3.9; Unit: V |
| Wireless technologies | LoRa |
Answers to the questions that the recorded characteristics of 920303 can answer. A question is not asked when nothing is recorded to answer it.
Yes — recorded under "P1.10": SX1262 Pin: NSS; function: SPI NSS.
Yes — recorded under "RAK4630 Module in LoRaWAN One-Time Sleep": Current Average: 4.23 uA; Condition - Voltage and Dwell Time: 3.3 V 10 seconds.
Yes — recorded under "RAK4630": USB, UART1.
Similar parts to answer your needs. Compare the main characteristics. A recorded replacement is a documented relation; a similar product is a similarity only, never a compatibility claim.
LoRa 470-510 MHz 50 Ohm PCB antenna with MHF-1 connector and cable

2.4GHz WiFi/BLE PCB Antenna MHF-1

PCB Antenna for LoRa® MHF-1 — 433-435 MHz

2.4GHz WiFi/BLE PCB Antenna MHF-4

Describe your application and constraints in a request.
What is recorded about the regulatory status and the life of this part.
No compliance statement is recorded for this part. Ask the supplier for the RoHS and REACH declarations and, for a radio product, the EU declaration of conformity.
| Current status | Status not stated |
| Key dates | Not recorded |
| Manufacturer part number | 920303 |
| Family | PCB Antenna for LoRa® MHF-1 |
| Manufacturer | RAKwireless |
PCB and FPC Antennas
2.4 GHz WiFi/BLE PCB Antenna, MHF-1 connector
Price on request
PCB and FPC Antennas
2.4 GHz WiFi/BLE PCB Antenna with MHF-4 Connector
Price on request
PCB and FPC Antennas
LoRa 902-928 MHz 50 Ohm PCB antenna with MHF-4 connector and cable
Price on request
PCB and FPC Antennas
LoRa 433-435 MHz 50 Ohm PCB antenna with MHF-1 connector and cable
Price on request
No advertising or analytics cookies. A single, strictly necessary cookie is set only if you sign in to your account. Your quote basket and comparison stay in your browser. Details