RAK Hotspot V2 – Indoor LoRaWAN Helium gateway EU868 with 3 dBi antenna

Indoor LoRaWAN Helium gateway EU868 with 3 dBi antenna

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • LoRaWAN
  • Fiber optic and SFP
Manufacturer part number
A15027
Manufacturer
RAKwireless

Indoor EU868 LoRaWAN gateway built on the Semtech SX1302 concentrator, supplied with a 3 dBi fiber glass antenna and a 1 meter Pulsar cable, for the Helium network.

Product overview

Overview. The RAK Hotspot V2 from RAKwireless is a ready-to-use LoRaWAN gateway for the Helium network, in the EU868 version covering 863 MHz to 870 MHz. It is built around a Semtech SX1302 LoRa concentrator and a Raspberry Pi 4, and provides network coverage and takes part in Proof-of-Coverage.

Main characteristics. The LoRa concentrator supports FSK and LoRa modulation, with a sensitivity of -139 dBm at Spreading Factor 12 and 125 kHz, an output power of 8 dBm and an efficiency above 80 %. The indoor bundle includes a 3 dBi fiber glass antenna, a peak gain of 2.8 dBi and a 1 meter Pulsar cable, with a voltage standing wave ratio (VSWR) of 1.5 or less.

Interfaces and connectivity. The gateway provides a Gigabit Ethernet port, an external LoRa antenna connector, a TF card slot holding the system image and device data, a pairing button and red and green status LEDs.

Power and environment. Power is supplied through USB-C with an EU standard power adapter. Consumption is 550 mA typical in standby and 950 mA maximum in LoRa Tx mode. The operating temperature range is -10 °C to +55 °C, the storage temperature range is -40 °C to +85 °C, and the operating humidity range is 5 to 95 %RH.

Typical uses. This indoor version lets the gateway be installed near a window or on a balcony, without rooftop access, to take part in the LoRaWAN Helium network.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote