RAK Hotspot V2 – Indoor LoRaWAN gateway EU868 with 3 dBi antenna

Indoor LoRaWAN gateway EU868 with 3 dBi antenna

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • LoRaWAN
  • Fiber optic and SFP
Manufacturer part number
A15028
Manufacturer
RAKwireless

RAKwireless EU868 indoor LoRaWAN gateway, ready to use for the Helium network, with Semtech SX1302 LoRa concentrator and 3 dBi fiber glass antenna.

Product overview

RAK Hotspot V2 LoRaWAN gateway. The RAK Hotspot V2 from RAKwireless is a ready-to-use LoRaWAN gateway for the Helium network, supplied in its EU868 version with a 3 dBi fiber glass antenna and a 1 meter Pulsar cable.

Main characteristics. It is built around a Semtech SX1302 LoRa concentrator and supports FSK and LoRa modulation. Its output power is adjustable from -6 dBm to 8 dBm through the PWID setting, and its sensitivity reaches -139 dBm at Spreading Factor 12 with a 125 bandwidth. The antenna has a peak gain of 2.8 dBi and a VSWR of 1.5 or less. The frequency range covered is 863 to 870 MHz.

Interfaces and connectivity. It provides a Gigabit Ethernet port, an external LoRa antenna connector, a TF card slot holding the system image and device data, a pairing button and status LEDs (red when powered on, green for system activity during startup).

Power and environment. It is powered through USB-C, with a UK standard power adapter supplied. Typical standby consumption is 550 mA and LoRa Tx mode reaches 950 mA maximum. It operates between -10 °C and +55 °C and can be stored between -40 °C and +85 °C.

Typical uses. This indoor version allows the gateway to be installed near a window or on a balcony, without rooftop access.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote