RAK Hotspot V2 – Indoor LoRaWAN gateway EU868 with 5.8 dBi antenna

Indoor LoRaWAN gateway EU868 with 5.8 dBi antenna

LoRaWAN Gateways, Concentrators & LPWAN Infrastructure

  • LoRaWAN
  • Fiber optic and SFP
Manufacturer part number
A15037
Manufacturer
RAKwireless

Ready-to-use LoRaWAN gateway for the Helium network, EU868 band, with a 5.8 dBi fiber glass antenna and a 5 meter Pulsar cable for indoor installation.

Product overview

Overview. The RAK Hotspot V2 from RAKwireless is a ready-to-use LoRaWAN gateway, EU868 version, supplied as an indoor bundle with a 5.8 dBi fiber glass antenna and a 5 meter Pulsar cable. It is designed for the Helium network and takes part in Proof-of-Coverage.

Main characteristics. It is built around a Semtech SX1302 LoRa concentrator and supports FSK and LoRa modulation. The frequency range runs from 863 MHz to 870 MHz. Peak gain is 2.8 dBi, with a VSWR of 1.5 or less and a feed impedance of 50 ohms. Sensitivity reaches -139 dBm at spreading factor 12 with a bandwidth of 125, -136 dBm with 250 and -134 dBm with 500.

Interfaces and connectivity. A Gigabit Ethernet port provides the wired network connection, an external LoRa antenna connector supports LoRaWAN communication, and a TF card slot holds the system image and device data. A pairing button and status LEDs indicate operation.

Power and environment. Power is supplied through USB-C with an EU standard power adapter. Standby consumption is typically 550 mA, and 950 mA maximum in LoRa Tx mode. The operating temperature range is -10 to +55 °C, and -35 to +75 °C in working conditions with 5 to 95 %RH humidity. The storage temperature range is -40 to +85 °C.

Typical uses. Indoor installation near a window or on a balcony, without rooftop access, to provide LoRaWAN coverage of an area.

Typical applications

Derived from the part category, not a compatibility statement.

See also

Technical questions

Ask a question

No published question about this part yet. Questions are reviewed before publication.

Request a quote