Product overview
Overview. The RAK Hotspot V2 from RAKwireless is an EU868 LoRaWAN gateway designed for outdoor deployment, supplied as a kit with an 8 dBi fiber glass antenna and a field tester.
Main characteristics. The frequency band is EU868, covering 863 MHz to 870 MHz. The antenna peak gain is 2.8 dBi or 2.3 dBi depending on the specification, with a feed impedance of 50 Ohms and a VSWR of 1.5 or less. Efficiency is above 80%.
Interfaces and connectivity. The gateway provides a Gigabit Ethernet port, a LoRa antenna connector, a TF card slot holding the system image and device data, and a pairing button. A red LED indicates power-on status and a green LED shows system activity during startup.
Power and environment. Power is supplied through a USB-C connector or an EU standard power plug. Standby consumption is typically 550 mA, rising to 950 mA in LoRa transmission mode. The operating temperature range is -10 ºC to +55 ºC, the storage range is -40 ºC to +85 ºC, and the working conditions allow -35 ºC to +75 ºC with 5 to 95 %RH humidity.
Modulation and radio performance. The gateway uses FSK and LoRa modulation. At 125 kHz bandwidth the sensitivity is -139 dBm at spreading factor 12, -136 dBm at 250 kHz and -134 dBm at 500 kHz. Transmit power is 8 dBm at setting 1 and -6 dBm at setting 0, with a TX power variation of ±1.5 dBm.
Typical uses. This gateway suits receiving LoRaWAN sensor data from devices spread over an outdoor site and forwarding it to a network through the Ethernet port.
Integration. Available on quotation from Atlas Electronics.